Guardian Boat | Vigilant Boat | Impact RHIB | Challenger Boat | Justice Boat | Dive Door Boat | Options - Brunswick Commercial and Government | Boston Whaler
Options

Options

Below is a partial list of notable options available on Brunswick Commercial and Government Products boats.

Heavy Duty Hull Equipment Console and Steering Engine and Drive System Navigation and Safety Cabin Options Seating and Storage Law Enforcement Weather Protection Collar Options Diving and Rescue Equipment Electrical Accessories Firefighting Trailer Special Purpose Equipment


Heavy Duty Hull Equipment

Painted Hull Slash

A one or two color angled slash painted on hull sides. High quality paint provides durable finish. Customer to specify color. Hull drawing provided for size and placement.

part number: 62503
Vigilant Cabin

Includes forward access hatch, gunwale boards, modified side rails.

part number: 2401
Stainless Steel Transom Corner Chafe Plates

Heavy-duty 1/8 inches 316L grade stainless steel plating is shaped to fit transom corners from rub rail to waterline. Designed to protect transom corners from damage. Hull has additional laminate for installation and extra strength. Powder-coated black. Factory installed only.

part number: 61555
Stainless Steel Transom Chafe Cap

Powder-coated, flat black, stainless steel cap that covers aft edge of transom to reduce risk of fiberglass damage from repeated engine changes.

part number: 61544
Side Rail

Heavy-duty welded stainless steel pipe. Rails secured to hull with 316L grade stainless steel machine screws tapped into 1/2 inches phenolic inserts laminated into the hull. Rail provides ergonomic handlhold amidships. All-welded construction adds strength and prevents water intrusion. Available on Guardian Boat models only.

part number: 61507
Stainless Steel Cutwater

Heavy-duty 1/8 inches 316L grade stainless steel plating is shaped to fit keel. Approximately 8 inches wide (4 inches either side of keel) and 6' long. Designed to protect keel from damage during beaching. Hull has additional laminate for installation and extra strength. Available on most models. Powder-coated black. Factory installed only.

part number: 61540
Stainless Steel Bow Eye Reinforcement

Heavy-duty 1/8 inches 316L grade stainless steel plating is shaped to fit keel in bow eye location. Approximately 8" wide and 10" long. Designed to prevent bow eye from loosening during towing operations. Hull has additional laminate for installation and extra strength. Available on  most models. Powder coated black. Factory installed only.

part number: 61543
Radial Arm Davit

Includes Block, Cable and Hook. Choice of manual or electric winch.

part number: 61573
Low Bow Rails

Heavy-duty welded aluminum pipe. Rails secured to hull with 316L grade stainless steel  machine screws tapped into 1/2 inches phenolic inserts laminated into the hull. Length varies per model. Rail provides handhold in bow area with a low profile to facilitate work over the side. All-welded construction adds strength and prevents water intrusion. Available on most models. Powder-coated haze grey. Other colors available. Factory installed only.

part number: 61501
Full Length Keel Guard

Polymer/Urethane: Abrasive resistant blend of Polymers and Urethanes. Full length on the keel, 2.5" either side of keel.

part number: 2591
Painted Hull Lettering

Up to 15 characters per side.

part number: 62502
Heavy Duty Rubbing Strakes

Choice of 1 per side or 2 per side. Large rubber "D" sections bolted through hull. Flexible enough to absorb impact. Protects hull when lying alongside ships or lower piers.

part number: 61521
High Pattern Bow Rail w/Center Boarding Rails

Heavy-duty welded aluminum 1 1/4 inches pipe. Rails secured to hull with 316L grade stainless steel machine screws tapped into 1/2 inches phenolic inserts laminated into the hull. Length varies by model. Rail provides secure handholds forward and amidships. Forward section is open to facilitate boarding over the bow. All-welded construction adds strength and prevents water intrusion. Available on most models. Powder-coated haze grey. Other colors available. Factory installed only.

part number: 61508
High/Low Bow and Side Rails

Heavy-duty welded aluminum pipe. Rails secured to hull with 316L grade stainless steel machine screws tapped into 1/2 inches phenolic inserts laminated into the hull. Length varies per model. Forward section is low to facilitate work over the side. Amidships section elevated to provide ergonimoic handhold. All-welded construction adds strength and prevents water intrusion. Factory installed only.

part number: 61502
Recessed Floor Tie-Down

Heavy-duty welded aluminum tie-downs fitted flush into cockpit decks. The tie-downs are powder-coated and measure approximately 4 inches by 4 inches and are secured with stainless steel machine screws to phenolic inserts laminated into the deck. Factory installed only. Priced per item. Specify location.

part number: 61571
Gunwale Lifting Eyes

Four stainless steel lifting plates sized for 1 1/8 inches stainless steel bolts. Hull area substantially reinforced with additional fiberglass laminate. Aluminum inserts provide enhanced pull-out security. Highly recommended for shipboard applications. Factory installed only.

part number: 61565

Custom Hull Color

Hull exterior and/or interior can be any color your agency or department requires.

part number: 60011 and 60012

Springline Cleats

Set of 2 cleats located at midships for ease of tying up.

part number: 61550
Lashing Rails

Heavy-duty welded 3/4" aluminum rail thru-bolted to hullside of cockpit interior. Cargo and loose gear can be tied off or secured to rail. All-welded construction adds strength and prevents water intrusion. Requires installation of rubbing strakes. Set of two. Powder-coated black. Other colors available. Factory installed only.

part number: 61532



Console and Steering
Side Console

Alert package. Console is moved to the starboard side with a bench seat.

part number: 60505
G17 Fiberglass Console

Fiberglass console includes welded aluminum hand rail, acrylic windscreen, locking console access door, and interior courtesy light. For single engine binnacle control only. Please consult factory for optimal configuration based on use requirements.

part number: 60512
J20 Fiberglass Console
J20 Fiberglass Console

Features include black powder coated, heavy-duty 1-inch aluminum powder-coated hand rail thru-bolted to console, tinted acrylic windscreen, locking composite access door; interior and exterior courtesy lights, 2 drink holders, molded-in compass flat; electronics flat with the ability to accommodate dual screens, incorporated footrest with non-skid.

part number: 2544


J21 Console
J21 Console

Fiberglass console with integrated footrest and toe kick. Designed for dual-engine binnacle controls. Ample space for multiple flush mounted electronics, and includes acrylic windscreen. Locking acrylic door allows access to wiring and storage. Please consult factory for optimal configuration based on use requirements.

part number: 60516


Aluminum Console

Welded aluminum console powder coated to match interior hull color. Includes integrated handrails, a large electronics flat or enclosure, and locking aluminum access door. Features shown on pictured console will vary according to options.
Fiberglass Console

Includes storage area, dome light, storage drawers, molded tempered glass windshield and grab rail (J32 Console model)


Engine and Drive System

Outboard Engines

BCGP offers a wide range of outboard engines. Brands offered include: Mercury Marine, Yamaha, Honda, and Evinrude.

Multiple Outboard Engine Installation

Contact sales rep for optimal configuration based on other options chosen and performance requirements.

Aluminum Outboard Engine Bracket

Attaches to stern to move engines aft and provides substantially increased deck space. With 82" swim platform. Not available with aft mount fire pump.

Inboard Engines

Specific BCGP models feature inboard propulsion options including gas, diesel, and water jet engines (Ultra and Hamilton.)


Sea Trial & Systems Check

Tests performed at BCGP facility and in nearby waterways.

part number: 62601



Navigation and Safety

Handheld Spotlight

Handheld with base and 12-Volt outlet.

part number: 60755
Navigation Frame

Offered on Impact models. Mounted forward of the transom, this option includes an aluminum powder-coated frame used to mount radar, antennaas, cameras, light bars, and floodlights.

part number: 68017/68019
Digital Compass

KVH Aziumuth 1000 Digital Fluxgate.

part number: 60750
Cockpit Floodlights

Hard top mounted.
Remote Control Spotlight

Choice of 200,000 or 80,000 CP.
Electric Anchor Windlass System

12-Volt windlass with on / off switch on windlass head. For handling line only, not chain. Mounts on models with bow decks. Please consult with factory for special reinforcement requirements.

part number: 61591
Cockpit Light

For mounting under cockpit gunnels or cabin overheads. Subdued red light reduces loss of night vision. Individually switched or wired to dash panel.

part number: 60764
Ritchie Compass

Analog, flush mount recommended on 17' and larger models. Well dampened for rough-water use. Backlit, with compensation adjustment. 4 1/2 inches power damp dial.

part number: 60743
Fire Extinguisher Upgrade
Fire Extinguisher Upgrade

Available in 2 lb or 5 lb capacity. 2 lb capacity not available on models larger than 17'.
 

Electric Bilge Pump

With float switch.

part number: 61599

Electronics Packages

Choose from the best electronics providers including Raymarine, Garmin, and Furuno.




Cabin Options

Vigilant Cabin (2 or 4 person options)

Provides weather protection for equipment and crew.

Aft Bulkhead

With door & window. On Impact models, Vigilant Boat cabin must be chosen as an option.

part number: 61585


Portable Marine Head

A lightweight, compact marine head suitable for limited use where space does not permit heads with holding tanks. Contains own water supply with an easily removable lower section that is carried ashore to empty. May be retrofitted in the field.

part number: 61579


Marine Head System

Manual flush toilet with installed holding tank. The waste tank can be emptied either by pumping overboard through macerator pump or by shore pump-out facility through deck fitting. Saltwater flush system via thru-hull fitting. Please consult factory. Must follow USCG procedure for overboard discharge.

part number: 61578

part number: 61545

Cabin Heater

Kerosene 11,000 BTU

part number: 60997




Seating and Storage
Shock Mitigating Seat

Various brands and configurations available. Consult with sales representative to select seat that meets mission requirements.
Pedestal Seat

Rotationally molded of tough UV resistant white polyethylene, marine-grade white quilted vinyl, snap-on removable cushions; tee-nut bottom inserts accept anodized support rails that make it compatible with most pedestals, swivel and force and aft seat slides.

part number: 61103
Aluminum Leaning Post with Gunrack/Storage

Includes doors, grabrail, and bolster.
Tubular Aluminum Leaning Post

36" in length, w/Grabrail.
Double Modular Seat

Offered on Impact RHIB models. Allows two passengers to sit securely facing forward. Features include a fiberglass base, powder-coated aluminum grab rails and backrest with cushion.

part number: 68013
Foldaway Cabin Seat (1) (Vigilant & Extended Challenger)

Used when unobstructed stand-up operation is desired on port side. Available on Challenger Boat and Vigilant Boat models. (each)

part number: 61152
Aluminum Leaning Post

Aluminum leaning post with additional reinforcement to endure grueling commercial use. Cushioned with lockable sliding storage doors aft.
Fiberglass Bench Seat/Leaning Post

Developed originally to carry combat troops, this rugged seat system can also be used when extra seating or storage is required. Measures 40 inches wide and is 65 inches long. Each seat has a wide floor-mounting flange and four or more plastic access doors. Fits 22' and larger Guardian Boat, and 26' Justice Boat. Includes leaning post pad and large seat cushion. (56 inches long)

part number: 61118

Additional Thwart Seat

Forward

part number: 61101



Law Enforcement

Siren with Amplifier

Choice of streamlined or flushmount.

part number: 61715
LED Light Series

Available in blue or red.

part number: 61733
LED Strobe Light

Choice of blue or red.
Flush Mount Strobe w/Built-In Siren & Amp

Ideal for the front side of consoles, this high-powered siren has the same sound quality as the streamlined siren. Protrudes only 1 1/2 inches from the surface and houses a powerful 3 inches by 7 inches blue strobe. Amplifier with weathertight enclosure mounted inside console. Uses noise canceling microphone and has 100-watt PA wail, yelp, horn and manual siren functions.

part number: 61702

Weather Protection
Canvas Weather Curtain System

Optional for the medium-duty or heavy-duty t-top. Completely encloses the operator with forward, rear, port (medium-duty part has four pieces) and starboard drop curtains. Composed of rugged acrylic material with non-corrosive zippers and snaps. On models less than 25', trim tabs are recommended to correct for list caused by strong crosswinds and to prevent wind-induced porpoising at high speeds.
Vigilant Cabin Visor System

Cabin visor & aft canvas roof extension. This top consists of aluminum forward and side overhangs and a light acrylic covered bow structure extending approximately 4' aft of the house. Ideally suited for reducing cabin temperature; helps restrict rain from entering open side windows. Factory installed only.

part number: 62472
Suntop With Boot

A ruggedly simple method of providing sun protection for center console models. Fabric is a durable acrylic material that is fade resistant. Bows are stainless steel. Generally, this top is centered over the driver, providing fore and aft shade. May be easily retrofitted in the field. Available for all models except Challenger Boats and Vigilant Boats.

part number: 62470

Canvas Cover for Console

Can accomodate either aluminum or fiberglass consoles.
 Hard Top with Electronics Box

Heavy duty support legs. Also includes PFD storage.


Collar Options

Inflation Pump

12V Collar air inflation pump.

Dull Finish

Dull coat finish applied to collar to reduce glare/reflection.
   Foam/Air Collars

Foam filled or air/foam combination collars available.
Bow Skirt

This is an additional fabric cover that is designed to reduce tube chafe and damage.
  Custom Color

Collars can be special ordered in custom colors.
   

Diving and Rescue Equipment

Torsional Tow Bar

Tow bar spans across gunwales. Bolts through gunwales for strength. may require aluminum gunwale upgrade on some models. Contact representative for details.
Engine Crash Rail

Powder coated aluminum to protect the engines and boat while towing. All-welded construction prevents water intrusion and provides superior strength.
Torsional Tow Bar with Tower

The same basic foundation as the popular torsion tow bar and extends upward to provide an elevated platform for lights, antennas, etc. Aluminum pipe bolted through the gunwale. A folding upper half and snap-back screen are available options.
Torsional Tow Bar Take Up Reel

Heavy-duty reel holds up to 250' of 5/8" double-braid tow line. Nylon axle bushing for easy movement and removable crank handle that fits either end.
Rescue Rails

Rugged 1" powdercoated aluminum rails feature welded construction, oversize mounting and backing pads and stainless steel bolts. When a dive door boat is ordered, rail is split.

part number: 61536
Dive Tank Rack

Welded aluminum or removable racks, mounted in the cockpit or bow area, can hold 3 or 6 bottles.
Floor Matting

A cushion-type mat that covers the floor using 1/2 inches thick matting. Open pattern allows water to drain through matting and aft into drains. Connected together with special connectors.

part number: 61574
Dive/Rescue Door

For 19' and larger models, this cutout lowers entry freeboard. Door openings are molded into hull (in the molding process) providing a smooth transition into boat. Installed in port side only. Includes aluminum gunnel option on some models. Self-bailing scupper package included. Factory installed only. The insert door slides on nylon tracks into the cutout opening and clamps down. Gasketed bottom edge reduces leaks and heavy-duty hooks hold door in place. High-density foam is inserted to prevent it from sinking. When cutout is in use, insert door is stored against the opposite gunnel in nylon chocks.
Available in 34", 45", or 60" sizes.

Swim Ladder w/Step

Tube mounted, FRP Construction with non-skid.

part number: 2545



Electrical Accessories


Solar Charging System

For charging batteries using solar power. Includes 80-watt solar array that can be mounted on T-top or elsewhere on the boat. 15 Amp charge controller with an LCD digital meter display.

part number: 2618

Battery Charger

For 1 to 3 Banks (Requires appropriate shore power option)

part number: 60950

Shore Power

Available in 110va/60hz, 220V/60HZ or 220V/50HZ

part number: 60951

Gas Generator System

5.0 kw or 7.3 kw gas generator system with low CO2 emissions.

leee-45 Wiring Upgrade

All Boat-Builder-Provided Electrical Systems utilize commercial Marine Multi-Conductor leee-45 approved, USCG & ABS Accepted cable with tinned copper conductors.

part number: 2599

EPIRB

ACR 2874 or equal.
Trim Tabs

Electric with indicator switch panel



Firefighting


20hp Darley Fire Pump

Available in aft or forward mount and intake.

part number: 61903

RF Remote Nozzle and Monitor

This option permits control of the nozzle from the helm.

52 HP Darley Fire Pump System

Requires appropriate shore power option. Forward installation with above deck engine enclosure.

part number: 61921

200 HP Fire Pump System

Made exclusively for BCGP boats, this pump delivers 1250 GPM.

Trailer
Galvanized Trailer

Designed for heavy-duty applications, each trailer is created and fitted for each Boston Whaler hull size. This ensures proper hull support, balance and safety both on the highway and when launching or retrieving boats.

part number: 62750
Aluminum Trailer

Designed for heavy-duty applications, each trailer is created and fitted for each Boston Whaler hull size. This ensures proper hull support, balance and safety both on the highway and when launching or retrieving boats.

part number: 62700

Special Purpose Equipment

7.62 Ammo Can Bench Seat Storage Shelf

Two storage shelves; one is mounted on the tripod gun plate and the other on the tripod. Each stores two .50 caliber NATO ammo cans. Includes hold-down straps for the cans. (NATO .50 caliber for MK16 Tripod).

part number: 62132
Bow Mounted MK16 Mod2 Tripod

This rugged stainless steel tripod is designed for 7.62 and .50-caliber machine guns or the 40mm MK19 grenade launcher. Comes with a bronze socket and train stops. Gun cradle must be ordered separately. When installed, the deck and hull structure is heavily reinforced with additional fiberglass and aluminum inserts and frequently an aluminum deck plate. Because of strength requirements, factory installation only.

part number: 62125

Nato .50 Cal Ammo Can MK16 Tripod Storage Shelves

Holds 5 cans.

part number: 62126

Quarter Mounted MK16 Mod2 Tripods

Same tripod as part number 62125, except one leg has been modified so that the tripod can rest on a heavily reinforced gunnel section. Includes stand with train stops but cradle (either 7.62, MK19 or .50 caliber) must be ordered separately. Because the total weight is not available on all models, please consult factory. (May require aluminum gunnel upgrade). With Hull Reinforcement (2 Bipods) (Requires Aluminum Gunwales).

part number: 62121

Deck Mounted 7.62mm Ammo Can Rack

Nato MK19 40mm Grenade (2 cans).