Choose features for the 1100 Impact

Standard Features
Standard Features options
Required

Options also required with your selection

Conflict

Options that cannot be combined with your selection
- Automatic Electric Bilge Pump (standard)
  x
- Below Deck Storage (standard)
  x
- Bow Handle (standard) • Bow Handle On tube
  x
- Bow and stern eyes (standard)
  x
- Bow locker (standard)
  x
- Commercial-grade tubes (standard) • Commercial-grade tubes Constructed from exclusive polyurethane fabric
  x
- Dual Inboard Engines (standard)
  x
- Dual water jets (standard)
  x
- Elephant trunk deck drains (standard)
  x
- External lifelines (standard)
  x
- Haze grey gelcoat (standard) • Haze grey gelcoat
  x
- Heavy duty fiberglass hull (standard)
  x
- Heavy duty inflation valves and pressure relief valves (standard)
  x
- Heavy duty rubbing strake (standard) • Heavy duty rubbing strake
  x
- Hull drain plug (standard)
  x
- Internal lifelines (standard)
  x
- Lifting handles (standard)
  x
- Non-skid molded into gel coated deck and applied to tubes (standard)
  x
- Safety relief valves (standard)
  x
- Stern lifting / towing points (standard)
  x
- Stern splashwell bulkhead
  x
- Tube reinforcements (standard)
  x
- Tube repair kit (standard)
  x
- Under deck fuel tank (standard)
  x
Heavy Duty Hull Equipment
Heavy Duty Hull Equipment options
Required

Options also required with your selection

Conflict

Options that cannot be combined with your selection
- Bottom paint • Bottom paint
  x
- Bow Skirt • Bow Skirt Provides an extra layer of tube protection.
  x
- Full Length Keel Guard • Full Length Keel Guard Polymer/Urethane: Abrasive Resistant Blend Of Polymers And Urethanes. Full Length On The Keel, 2.5"" Either Side of Keel
  x
- Gunwale lifting eyes • Gunwale lifting eyes Four stainless steel lifting plates sized for 1 1/8 inches shackles. Thru-bolted using five 5/16 inches stainless steel bolts. Hull area substantially reinforced with additional fiberglass laminate. Aluminum inserts provide enhanced pull-out security. Highly recommended for shipboard applications. Factory installed only.
  x
- Lifting eyes integrated into hull structure
  x
- Recessed floor tie-down • Recessed floor tie-down Heavy-duty welded aluminum tie-downs fitted flush into cockpit decks. The tie-downs are powder-coated and measure approximately 4 inches by 4 inches and are secured with stainless steel machine screws to phenolic inserts laminated into the deck. Factory installed only. Priced per item. Specify location.
  x
- Stainless steel bow eye reinforcement • Stainless steel bow eye reinforcement Heavy duty 1/8" 316L grade stainless steel plating is shaped to fit keel in bow eye location. Approximately 8" wide and 10" long. Designed to prevent bow eye from loosening during towing operations. Hull has additional laminate for installation and extra strength. Available on most models. Powder coated black. Factory installed only.
  x
- Vigilant cabin • Vigilant cabin Includes forward access hatch, gunwale boards, modified side rails
  x
Console and Steering
Console and Steering options
Required

Options also required with your selection

Conflict

Options that cannot be combined with your selection
- Aluminum Console • Aluminum Console Welded aluminum console powdercoated to match interior hull color. Includes integrated handrails, a large electronics flat or enclosure, and locking aluminum access door. Features shown on pictured console will vary according to options.
  x
- Hydraulic tilt steering
  x
- Large Fiberglass Console
  x
- Trim tabs • Trim tabs Electric W/ Indicator Switch Panel
  x
Engine and Drive System
Engine and Drive System options
Required

Options also required with your selection

Conflict

Options that cannot be combined with your selection
- 4-Stroke engine break-in and initial maintenance
  x
- Aluminum Outboard Engine Bracket • Aluminum Outboard Engine Bracket Attaches to stern to move engines aft and provides substantially increased deck space. With 82" swim platform. Not available with aft mount fire pump.
  x
- Gauge Package
  x
- Outboard engine - Evinrude • Outboard engine - Evinrude Contact a representative to determine optimal engine configuration based on intended use, performance requirements, and additional options selected.
  x
- Outboard engine - Honda • Outboard engine - Honda Contact a representative to determine optimal engine configuration based on intended use, performance requirements, and additional options selected.
  x
- Outboard engine - Mercury • Outboard engine - Mercury Contact a representative to determine optimal engine configuration based on intended use, performance requirements, and additional options selected.
  x
- Outboard engine - Yamaha • Outboard engine - Yamaha Contact a representative to determine optimal engine configuration based on intended use, performance requirements, and additional options selected.
  x
- Racor Fuel / Water Separator Upgrade
  x
- Sea trial & systems check • Sea trial & systems check Tests performed at BCGP facility and in nearby waterways.
  x
- Stainless propellers
  x
- Ultrajet 305 Waterjet with Swim Platform
  x
Navigation and Safety
Navigation and Safety options
Required

Options also required with your selection

Conflict

Options that cannot be combined with your selection
- Cockpit Light • Cockpit Light For mounting under cockpit gunnels or cabin overheads. Subdued red light reduces loss of night vision. Individually switched or wired to dash panel.
  x
- Cockpit floodlight • Cockpit floodlight Hardtop mounted.
  x
- Digital Compass • Digital Compass KVH Azimuth 1000 Digital Fluxgate
  x
- Electronics package - Furuno • Electronics package - Furuno Contact a representative to determine optimal electronics configuration based on intended use.
  x
- Electronics package - Garmin • Electronics package - Garmin Contact a representative to determine optimal electronics configuration based on intended use.
  x
- Electronics package - Raymarine • Electronics package - Raymarine Contact a representative to determine optimal electronics configuration based on intended use.
  x
- Handheld spotlight • Handheld spotlight Handheld with base and 12-Volt outlet
  x
- Navigation Frame • Navigation Frame Offered on Impact models. Mounted forward of the transom, this option includes an aluminum powder-coated frame used to mount radar, antennas, cameras, light bars, and floodlights.
  x
- Remote control spotlight • Remote control spotlight Choice of 200,000 or 80,000 CP
  x
- Ritchie compass • Ritchie compass Analog, flush mount recommended on 17' and larger models. Well dampened for rough-water use. Backlit, with compensation adjustment. 4 1/2 inches power damp dial.
  x
- Underwater LED Lights
  x
Cabin Options
Cabin Options options
Required

Options also required with your selection

Conflict

Options that cannot be combined with your selection
- Aft bulkhead • Aft bulkhead With door & window. On Impact models, Vigilant cabin must be chosen as an option.
  x
- Cabin heater • Cabin heater Kerosene 11,000 BTU
  x
Seating And Storage
Seating And Storage options
Required

Options also required with your selection

Conflict

Options that cannot be combined with your selection
- Aft Storage Box • Aft Storage Box
  x
- Aluminum Leaning Post • Aluminum Leaning Post Aluminum leaning post with additional reinforcement to endure grueling commercial use. Cushioned with lockable sliding storage doors aft.
  x
- Pedestal seat • Pedestal seat Rotationally molded of tough UV resistant white polyethylene, marine-grade white quilted vinyl, snap-on removable cushions; tee-nut bottom inserts accept anodized support rails that make it compatible with most pedestals, swivel and fore and aft seat slides.
  x
- Shock mitigating seat • Shock mitigating seat Various brands and configurations available. Consult with sales representative to select seat that meets mission requirements.
  x
Law Enforcement
Law Enforcement options
Required

Options also required with your selection

Conflict

Options that cannot be combined with your selection
- Flush Mount Strobe W/ Built-In Siren & Amp • Flush Mount Strobe W/ Built-In Siren & Amp Ideal for the front side of consoles, this high-powered siren has the same sound quality as the streamlined siren. Protrudes only 1 1/2 inches from the surface and houses a powerful 3 inches by 7 inches blue strobe. Amplifier with weathertight enclosure mounted inside console. Uses noise canceling microphone and has 100-watt PA wail, yelp, horn and manual siren functions.
  x
- LED Light Series • LED Light Series Available in blue or red.
  x
- LED strobe light • LED strobe light Choice of blue or red
  x
- Siren with amplifier • Siren with amplifier Choice of Streamlined or Flushmount
  x
- Whelen LED Mini-Edge W/ Siren, PA, AMP
  x
- Whelen Light Bar
  x
- Whelen Light Bar W/ Siren, PA & Amplifier
  x
Weather Protection
Weather Protection options
Required

Options also required with your selection

Conflict

Options that cannot be combined with your selection
- Canvas Weather Curtain System • Canvas Weather Curtain System Optional for the medium-duty or heavy-duty t-top. Completely encloses the operator with forward, rear, port (medium-duty part has four pieces) and starboard drop curtains. Composed of rugged acrylic material with non-corrosive zippers and snaps. On models less than 25', trim tabs are recommended to correct for list caused by strong crosswinds and to prevent wind-induced porpoising at high speeds.
  x
- Heavy Duty T-Top
  x
- Suntop With Boot • Suntop With Boot A ruggedly simple method of providing sun protection for center console models. Fabric is a durable acrylic material that is fade resistant. Bows are stainless steel. Generally, this top is centered over the driver, providing fore and aft shade. May be easily retrofitted in the field. Available for all models except Challengers and Vigilants.
  x
Collar Options
Collar Options options
Required

Options also required with your selection

Conflict

Options that cannot be combined with your selection
- 12V Collar air inflation pump
  x
- Dull coat added to collar
  x
- Foam filled collar upgrade
  x
Diving and Rescue Equipment
Diving and Rescue Equipment options
Required

Options also required with your selection

Conflict

Options that cannot be combined with your selection
- Bow Samson Post
  x
- Dive Tank Rack • Dive Tank Rack Welded aluminum or removable racks, mounted in the cockpit or bow area, can hold 3 or 6 bottles.
  x
- Engine Crash Rail • Engine Crash Rail Powder coated aluminum to protect the engines and boat while towing. All-welded construction prevents water intrusion and provides superior strength.
  x
- Floor Matting • Floor Matting A cushion-type mat that covers the floor using 1/2 inches thick matting. Open pattern allows water to drain through matting and aft into drains. Connected together with special connectors.
  x
- Freshwater Shower
  x
- Raw water wash down system
  x
- Tow Post
  x
- Tow rail tower
  x
- Tube Mounted Swim Ladder
  x
Electrical Accessories
Electrical Accessories options
Required

Options also required with your selection

Conflict

Options that cannot be combined with your selection
- 12 Volt Outlet
  x
- Battery Charger • Battery Charger For 1 To 3 Banks (Requires Appropriate Shore Power Option)
  x
- EPIRB • EPIRB ACR 2874 or Equal
  x
- Lockable laptop box installed in console
  x
- Shore Power • Shore Power Available in 110vac/60hz, 220V/60HZ or 220V/50HZ
  x
- Solar Charging System • Solar Charging System For charging batteries using solar power. Includes 80-watt solar array that can be mounted on T-top or elsewhere on the boat. 15 Amp charge controller with an LCD digital meter display.
  x
Trailer
Trailer options
Required

Options also required with your selection

Conflict

Options that cannot be combined with your selection
- Aluminum Trailer • Aluminum Trailer Designed for heavy-duty applications, each trailer is created and fitted for each Boston Whaler hull size. This ensures proper hull support, balance and safety both on the highway and when launching or retrieving boats.
  x
Special Purpose Equipment
Special Purpose Equipment options
Required

Options also required with your selection

Conflict

Options that cannot be combined with your selection
- 7.62 Ammo Can Bench Seat Storage Shelf • 7.62 Ammo Can Bench Seat Storage Shelf Two storage shelves; one is mounted on the tripod gun plate and the other on the tripod. Each stores two .50 caliber NATO ammo cans. Includes hold-down straps for the cans. (NATO .50 caliber for MK16 Tripod)
  x
- Bow Mounted Mk16 Mod2 Tripod • Bow Mounted Mk16 Mod2 Tripod This rugged stainless steel tripod is designed for 7.62 and .50-caliber machine guns or the 40mm MK19 grenade launcher. Comes with a bronze socket and train stops. Gun cradle must be ordered separately. When installed, the deck and hull structure is heavily reinforced with additional fiberglass and aluminum inserts and frequently an aluminum deck plate. Because of strength requirements, factory installation only.
  x
- Deck Mounted 7.62mm Ammo Can Rack • Deck Mounted 7.62mm Ammo Can Rack Nato Mk19 40mm Grenade (2 Cans)
  x
- Nato .50 Cal Ammo Can Mk16 Tripod Storage Shelves • Nato .50 Cal Ammo Can Mk16 Tripod Storage Shelves Holds 5 Cans
  x
- Quarter Mounted Mk16 Mod2 Tripods • Quarter Mounted Mk16 Mod2 Tripods Same tripod as part number 62125, except one leg has been modified so that the tripod can rest on a heavily reinforced gunnel section. Includes stand with train stops but cradle (either 7.62, MK19 or .50 caliber) must be ordered separately. Because the total weight is not available on all models, please consult factory. (may require aluminum gunnel upgrade). With Hull Reinforcement (2 Bipods) (Requires Aluminum Gunwales)
  x