Standard Features

• Automatic electric bilge pump (standard)
• Below Deck Storage (standard)
• Bow Handle (on tube) (standard)
• Bow locker (standard)
• Commercial-grade tubes made with exclusive polyurethane fabric (standard)
• Elephant trunk deck drains (standard)
• External lifelines (standard)
• Haze gray gelcoat (standard)
• Heavy duty fiberglass hull (standard)
• Heavy duty inflation valves and pressure relief valves (standard)
• Heavy duty rubbing strake (standard)
• Hull drain plug (standard)
• Internal lifelines (standard)
• Lifting handles (standard)
• Manual Collar Pump (standard)
• Non-slip molded into gel coated deck and applied to tubes (standard)
• Safety relief valves (standard)
• Stainless Steel Bow / Stern Eyes (standard)
• Stern lifting / towing points (standard)
• Tube reinforcements (standard)
• Tube repair kit (standard)
• Under deck fuel tank (standard)

Heavy Duty Hull Equipment Options

• Aluminum Transom Cap Assembly With 2 Aft Mooring Bits And Handrail W/Foldable Ensign Staff (Requires Full Transom)
• Bow Skirt
• Commercial Off The Shelf (Cots) Manuals
• Fire Retardant Vinylester Resin & Wood-Free Construction
• "Full Length Polymer/Urethane Keel Guard: Abrasive Resistant Blend Of Polymers And Urethanes. Full Length On The Keel, 2.5"" Either Side of Keel"
• Full Length Stainless Steel Cutwater
• Gunwale Lifting Eyes (4)
  

  Stainless steel lifting plates sized for 1 1/8 inches shackles. Thru-bolted using five 5/16 inches stainless steel bolts. Hull area substantially reinforced with additional fiberglass laminate. Aluminum inserts provide enhanced pull-out security. Highly recommended for shipboard applications. Factory installed only.

• Heavy Duty Recessed Floor Tie Down (1)
  

  Heavy-duty welded aluminum tie-downs fitted flush into cockpit decks. The tie-downs are powder-coated measure approximately 4 inches by 4 inches and are secured with stainless steel machine screws to phenolic inserts laminated into the deck. Factory installed only. Priced per item. Specify location. (each)

• Lifting Sling Set W/Load Test And Certification Documentation
• Side Rail
  

  Heavy-duty welded stainless steel pipe. Rails secured to hull with 316L grade stainless steel machine screws tapped into 1/2 inches phenolic inserts laminated into the hull. Rail provides ergonomic handhold amidships. All-welded construction adds strength and prevents water intrusion. Available on Guardian models only.

• Springline Cleats (2)
• Stainless Steel Bow Eye Reinforcement
• Unique Item Identification Labels

Hull Coloring, Lettering and Paint Options

• Bottom Paint

Engine Equipment / Installation Options

• 3 Gallon Bombardier Oil Tank
• 3 Gallon Mercury Oil Tank
• 3 Gallon Yamaha Oil Tank
• Bombardier Dual Engine Pre-Rig W/O Gauges
• Brp E-Tec Dual Engine I-Command Digital Gauges
• Builders Trials & Systems Check with Customer At EC Facility
• Dual Engine Installation & Performance Verification
• Honda Dual Engine Pre-Rig W/O Gauges
• Mercury Dual Engine Pre-Rig W/O Gauges
• Mercury Dual Engine Verado Pre-Rig W/DTS & Smartcraft
• Propeller, Stainless V-6's
• Propeller, Stainless V-8's
• Racor Fuel / Water Separator Upgrade (1)
• Virtual Lifeline wireless emergency engine shut off device- Dual O/B Eng
• Virtual Lifeline -wireless emergency engine shut off device SGL O/B Eng
• Yamaha Dual Engine Pre-Rig W/O Gauges
• Yamaha Pre-Rig Dual "Dec"

Gauge and Light Options

• Bombardier Dual Engine Gauge Package
• Bombardier Oil Level Gauge
• Bombardier Speedometer (1)
• Bombardier Water Pressure Gauge (1)
• Bow Docking Lights
• Cockpit Light- Red (1)
  

  For mounting under cockpit gunnels or cabin overheads. Subdued red light reduces loss of night vision. Individually switched or wired to dash panel. (red)

• Floodlight (1)
  

  Designed to flood working areas with a 50-watt halogen diffused light spread over a large area. Non-corrosive black casing and durable stainless steel bracket for easy mounting on roofs, towers, masts, etc. Measures only 7 inches wide by 5 1/2 inches high by 4 inches deep. Frequently mounted in pairs for added dependability.

• Honda Dual Engine Gauge Package
• Honda Water Pressure Gauge (1)
• Mercury Dual Engine Analog Gauge Package
• Mercury Dual Engine Smartcraft Gauge Package
• Mercury Dual Engine Vessel View Gauge Package - Opti
• Mercury Oil Tank Level Gauge (1)
• Mercury Speedometer (1)
• Mercury Water Pressure Gauge (1)
• Push To Start Panel Upgrade - Dual Engine
• Spotlight, Handheld W / Base and 12-Volt Outlet
  

  Hand-held waterproof spotlight (black 6 inches case) with 2 Halogen light bulbs, 55-watt for close-in range and 100-watt long-range, switched independently. Electrical connection: spiral cable leading out of handle, extended length approximately 3.5 m, with universal plug for connection to socket or cigarette lighter. Comes with mounting bracket and 12-volt outlet.

• Vessel View Gauge Upgrade - Dual Eng Verado
• Yamaha Dual Engine Gauge Package
• Yamaha Dual Gauge "Dec"
• Yamaha Fuel Management Gauge
• Yamaha Hourmeter (1)
• Yamaha Water Pressure Gauge (1)
• Yamaha Water Temperature Gauge (1)

Electrical Accessories Options

• 12V DC Converter 9 Sure Power P/N 522040
• 12 Volt Outlet
• 80 Watt Solar Charging System
  

  For charging batteries using solar power. Includes 80-watt solar array that can be mounted on T-top or elsewhere on the boat. 15 Amp charge controller with an LCD digital meter display.

• Battery Charger For 1 To 3 Banks (Requires Appropriate Shore Power Option)
• Battery System For Dual Engines, Two Starting Batteries And One Aux Battery (Does Not Include Batteries)
• Battery System For Dual Engines, Two Starting Batteries And Two Aux Batteries (Does Not Include Batteries)
• Dynoplate Bonding System To Include 6" X 18" Plate And Connection To Craft Bonding System
• Electrical Distribution Panel With Circuit Breakers For Electronics
• Electronic Cables And Conductors Supported By (Cres) Stainless Steel Supports/Cres Banding With Chaffing Protection. (Except In electrical enclosures and cabin/console)
• Eod Airpax Breakers Upgrade (No Fuses)
• Extended Switch Panel Upgrade - Bilge/Nav/8 Aux
• Ieee-45 Wiring Upgrade: All Boat-Builder-Provided Electrical Systems Utilize Commercial Marine Multi-Conductor Ieee-45 Approved, USCG & ABS Accepted Cable With Tinned Copper Conductors
• Maintenance Free, Wet Cell Deep Cycle Battery, Group 27, 115 Amp Hr
• Maintenance Free, Wet Cell Starting Battery, Group 24, 1000 Mca
• Optima 34m-1000 Mca (Agm) - Engine Starting Battery
• Optima D34m-870 Mca Deep Cycle (Agm) - Auxilary Battery
• Shore Power 110vac/60hz
• Shore Power 220vac/50hz
• Shore Power 220vac/60hz
• Standard Horizon, Quest-X Vhf Radio: Black, With 6db Antenna, Interfaced To Gps Receiver Per Oem Instructions
• Transducer Upgrade Thruhull
• Upgraded Switch Panel And Circuit Breakers To Include Airpax Breakers
• Verado Engine Starting Battery (Agm-1110) Required For All Verados

Navigation and Safety Options

• 5 LB Fire Extinquisher
• Bilge Blower
• Bilge Pump, Manual Diaphram Pump W/Overboard Discharge
• Compass, KVH Azimuth 1000 Digital Fluxgate
• Compass, Ritchie Helmsman (Flush / Gimbal Mount)
  

  Available in 17' to 27' models. Lighted for night-time operation. 4 inches in diameter, can be flush or gimbal mounted on 17' Justice. (flush or gimbal mount)

• Compass, Ritchie Navigator (Flush Mount)
  

  Flush mount recommended on 17' and larger models. Well dampened for rough-water use. Backlit, with compensation adjustment. 4 1/2 inches power damp dial. (flush mount)

• Premium Single Trumpet Electric Horn
  

  A powerful electric horn producing an “air horn” sound. Stainless steel construction and horn support arm make this unit suitable for marine applications. Mounts in front of console (brackets required) or on roof.

• Spotlight, Acr Remote Control 80,000 Cp

Fuel Systems Options

• Manual Fuel Tank Sounder

Console and Steering Options

• A10 Heavy Duty Welded Aluminum Console
  

  Welded, aluminum console constructed with 3/16 inches plate powder-coated to match interior hull color. Console is secured with stainless steel machine screws tapped into 1/2 inches phenolic inserts laminated into the hull or thru-bolted to deck (depends on model). Features include integrated hand rails welded to console, a large electronics enclosure (suitable for radar and other large display electronics) with lockable / removable clear acrylic door, an electronics box with flush-mount panel and lockable / removable acrylic door (for radios and smaller electronic equipment), locking watertight aluminum access door, interior courtesy light and recessed area for switches with clear acrylic drip shield. Console base measures approximately 36 inches wide by 44 inches deep. Height to top of console approximately 53 inches. Console is available as an option on larger center console models. Sized for dual-engine binnacle control. Features shown on pictured console will vary according to boat model. Please consult factory.

• G21 Console Folding Shelf Removable
• G21 Fiberglass Console
  

  Fiberglass console is secured with stainless steel machine screws tapped into half-inch phenolic inserts laminated into the hull or thru-bolted to the deck (depends on the model). Features include black powder coated, heavy-duty 1-inch aluminum powder-coated hand rail thru-bolted to console, tinted acrylic windscreen, covered chart flat,two locking composite console access doors; interior and exterior courtesy lights, 2 drink holders, molded-in compass flat; electronics flat with the ability to accommodate dual screens, incorporated footrest with non-skid. Console base measures approximately 40” wide by 40” deep. Console is standard equipment on 21, 24 and 26 Justice. Sized for dual engine binnacle control.

• Hydraulic Tilt Steering
• J20 Fiberglass Console
  

  Fiberglass console is secured with stainless steel machine screws tapped into half-inch phenolic inserts laminated into the hull or thru-bolted to the deck (depends on the model). Features include black powder coated, heavy-duty 1-inch aluminum powder-coated hand rail thru-bolted to console, tinted acrylic windscreen, locking composite console access door; interior and exterior courtesy lights, 2 drink holders, molded-in compass flat; electronics flat with the ability to accommodate dual screens, incorporated footrest with non-skid.

• Pt-6 Center Console
• Pt-7 Center Console
• Twin Cylinder Steering Upgrade

Propulsion and Drive System Options

• Aluminum Outboard Engine Bracket W/ 82" Swim Platform
  

  Attached to stern of hull to move engines aft and provides substantially increased deck space. Available on 25' Guardian, 27' Guardian

• Trim Tabs - Electric W/ Indicator Switch Panel

Seating Options

• 36" Alum Leaning Post W/ Doors, Grabrail, Gunrack/Strge
  

  Aluminum leaning post features lockable storage for shotguns and gear in the back of the seat. Available on most center console models 18' and larger.

• 36" Alum Leaning Post W/ Doors, Grabrail, Gunrack/Strge, Blstr
• 36" Alum Leaning Post W/ Storage Box & Ammo Can Ext. Lid
• 36" R6 Alum Leaning Post W/ Aft Storage Box
  

  Rugged, welded aluminum unit featuring our proven leaning post shape with a lockable storage box aft. Upper portion of leaning post includes a shelf with lockable / sliding Plexiglas doors and grab rail. Room below for batteries, VRO tank and more storage. Measures 36 inches wide by 30 inches fore and aft by 33 inches high. Cushions are removable. For Guardians 18' plus and other center-console models 21' and larger. Because of length, this unit may interfere with dive door opening on some models.

• 36" R6 Alum Leaning Post W/ Door
  

  Available on all center console models 21' and up. Features two lockable Plexiglas doors, a storage shelf, grab rail and removable cushion. Room inside for two batteries and / or 3-gallon VRO tank.

• 36" R6 Alum Leaning Post W/Door, Aft Storage Box & Backrest
• 36" R6 Alum Leaning Post W/ Door, Backrest, Footrest

  Backrest and footrest for an aluminum console. Welded construction, 3/16 inches aluminum.

• Double Modular Seat
  

  Offered on Impact models. Allows two passengers to sit securely facing forward. Features include a fiberglass base, powder-coated aluminum grab rails and backrest with cushion

• Dual Pedestal Seats With Armrest
  

  Rotationally molded of tough UV resistant white polyethylene, marine-grade white quilted vinyl, snap-on removable cushions; tee-nut bottom inserts accept anodized support rails that make it compatible with most pedestals, swivel and fore and aft seat slides.

• Pt-7d Folding Backrest Seat
• Pt-7m Folding Backrest Seat
• S-7d Backrest Seat
• Single Low Back Bostrom Pedestal Seat With Armrests
• Single Modular Seat
• Tubular Aluminum Leaning Post W/ Grabrail- 36"
• Ullman Atlantic Seat
  

  Designed primarily for cabin boats and to allow straddle position when needed and reclining when possible. Superp comfort with soft leather upholstery and extra-high carbon-fiber backrest. Vinyl upholstery optional for open cockpits. Armrests with fittings for Joystick and trackball are optional. Ullman Leadflex Atlantic Suspension Mechanism allows 200 mm travel. Can be optimized to any specific vessel. All Ullman seats are designed to protect the rider from injuries. The seat design optimizes your body posture, while the spring and damping system take care of the high forces during impact.

• Ullman Biscaya Seat W/Fiberglass Base
  

  Biscaya has a high backrest for maximum comfort and support. Longer saddle sides for optimal lateral support in straddling position. Extra padding on the front of the backrest and over its top. Zipped neoprene pouch for gear on backside of backrest. Two handles - wider support for passengers behind. Available on FRP bases for two seat heights 750 mm and 810 mm. All Ullman Seats are designed to protect the rider from getting injured. The seat design optimizes your body posture while the spring and damping system takes care of the high forces during impact.

Deck Cooler / Utility Box Options

• 50" Alu Deck Utility Box with Cushion
  

  Rugged storage box has lockable cover and removable cushion. Heavy bases under box elevate it slightly above the floor for drainage. Fasteners are hidden inside to prevent removal when locked. Custom sizes for aluminum boxes available upon request. (Large-size aluminum, 50 inches wide, 18 inches deep and 13 inches high)

• Medium FRP Deck Utility Box with Cushion
  

  Rugged storage box has lockable cover and removable cushion. Heavy bases under box elevate it slightly above the floor for drainage. Fasteners are hidden inside to prevent removal when locked. Custom sizes for aluminum boxes available upon request.(Medium-size fiberglass, 36 inches wide, 18 inches deep and 13 inches high)

Mast & Arch Options

• Multi-Purpose Mast: Includes Lights For Riam (Red-White-Red) And Towing (White-Amber), D-Rings For Day Shapes And Flags
• Radar Mast
• Strobe & Floodlight Mast (Aft of Seat) (Requires Aluminum Leaning Post)
  

  A rugged aluminum pipe suitable for mounting our 6 inches strobe and up to 3 floodlights. Hinges to the deck and can be lowered for low bridges or garage storage. When installed, the 360-degree anchor light is mounted on top so glare does not reflect down into the boat. Designed to mount against aluminum leaning posts. Lights and strobes are optional. For center console models 17' and larger. (aft of seat, requires aluminum leaning post)

• Strobe & Floodlight Mast (Deck Mount With Aft Bulkhead Clamp)
• Strobe & Floodlight Mast, L/P W/ Backrest

Weather Protection Options

• Aluminum Console Windshild T-Top With Overhead Electronics Box (A10/A12 Console)
• Canvas Cover For Aluminum Console
• Canvas Cover For Aluminum Leaning Post With Gun Rack and Storage Shelves
• Canvas Cover For Aluminum R6 Leaning Post
• Canvas Cover For Fiberglass Console Without T-Top
• Canvas Cover For Fiberglass Console With T-Top
• Canvas Cover For Heavy Duty Aluminum Leaning Post With Backrest
• Canvas Cover For Heavy Duty Aluminum Leaning Post With Storage Box
• Canvas Cover For Heavy Duty Aluminum Leaning Post With Storage Box & Backrest
• G21 Medium Duty T-Top W/Radio Box With Lockable Door
• Heavy Duty T-Top A-10 Alum Console
• J20 Heavy Duty T-Top W/ Radio Box With Lockable Door
• Suntop With Boot
  

  A ruggedly simple method of providing sun protection for center console models. Fabric is a durable acrylic material that is fade resistant. Bows are stainless steel. Generally, this top is centered over the driver, providing fore and aft shade. May be easily retrofitted in the field. Available for all models except Challengers and Vigilants.

Law Enforcement Equipment Options

• Flush Mount Siren W/ Amp
• Flush Mount Strobe W/ Built-In Siren & Amp
  

  Ideal for the front side of consoles, this high-powered siren has the same sound quality as the streamlined siren. Protrudes only 1 1/2 inches from the surface and houses a powerful 3 inches by 7 inches blue strobe. Amplifier with weathertight enclosure mounted inside console. Uses noise canceling microphone and has 100-watt PA wail, yelp, horn and manual siren functions.

• LED Light Series 400 Blue (QTY 1)
• LED Light Series 400 Red (QTY 1)
• LED Light Series 500 Blue (QTY 1)
• LED Light Series 500 Red (QTY 1)
• Streamlined Siren W/ Amplifier
  

  An attractive 100-watt siren for mounting in front of consoles (optional bracket required), on roofs or towers. Amplifier in weathertight enclosure to prevent internal corrosion. Remote face plate is non-corrosive and matches other Whaler switch panels. Manual siren button plus wail, yelp, PA and horn functions. Noise canceling microphone is detachable.

• Whelen 28" LED Mini-Edge Ultra Freedom W/ Siren, PA, AMP
  

  An attractive 100-watt siren for mounting in front of consoles (optional bracket required), on roofs or towers. Amplifier in weathertight enclosure to prevent internal corrosion. Remote face plate is non-corrosive and matches other Whaler switch panels. Manual siren button plus wail, yelp, PA and horn functions. Noise canceling microphone is detachable.

• Whelen 48" LED Edge Ultra Freedom W/Siren, PA & Amp

  28” and 48” wide light bar features low-profile LED lights. Lights available in red, blue and amber. Includes siren, PA and amplifier (not shown). Ask for optional mounting locations.

Diving and Rescue Equipment Options

• Day Shapes For Riam (Sphere-Diamond-Shpere)
• Dive Bottle Rack
• Dive Bottle Rack: Designed To Hold Various Bottle Sizes, Removable; Fittings On Tow Rail Designed Accept Additional Features (I.E. Stern Seat, Take-Up Reel, Etc)"
• Flags For Mulit-Purpose Mast: Alpha Signal Flag, Recreational Dive Flag And National Ensign
• Floor Matting - Open Pattern
  

  A cushion-type mat that covers the floor using 1/2 inches thick matting. Open pattern allows water to drain through matting and aft into drains. Connected together with special connectors.

• Led Cockpit Floodlight: 12 Vdc Led Work Light Mounted On T-Top For Dive Operations
• Tube Mounted Frp Box W/Swim Ladder

Special Purpose Equipment Options

• Bow Mounted Gun Plate W/ Hull Reinforcement For Mk16 Tripod (Does Not Include Tripod)
• Bow Mounted Mk16 Mod2 Tripod W/ Hull Reinforcement
  

  This rugged stainless steel tripod is designed for 7.62 and .50-caliber machine guns or the 40mm MK19 grenade launcher. Comes with a bronze socket and train stops. Gun cradle must be ordered separately. When installed, the deck and hull structure is heavily reinforced with additional fiberglass and aluminum inserts and frequently an aluminum deck plate. Because of strength requirements, factory installation only.

• Deck Mounted Nato 7.62mm Ammo Can Rack For Five Cans (2 Racks/10 Cans)
• Nato .50 Cal Ammo Can Mk16 Tripod Storage Shelves For 5 Cans
  

  62132: Shelf for bench seats is suitable for holding two NATO 7.62mm ammo cans per shelf. Up to four shelves can fit each bench. Available with the 6-10 man bench seat option. (NATO 7.62mm for bench seats)

Aluminum Trailer Options

• Heavy Duty Aluminum Trailer W/Torsion Axles
  

  Designed for heavy-duty applications, each trailer is created and fitted for each Boston Whaler hull size. This ensures proper hull support, balance and safety both on the highway and when launching or retrieving boats.

• Led Trailer Lights
• Pintle Hitch W/Brake Actuator - Alum. Trailer
• Stainless Steel Caliper Assembly, Cylinder and Guide Pins
• Tie Down System, Boat To Trailer/Trailer To Aircraft
• Trailer, 1 Axle SS Brakes / Calipers / Cyl / Pins Per Axle
• Trailer Hitch W/Adj Plt/Lunette Eye/Ball Rcvr
• Trailer Military 7 Pin Plug
• Trailer, Nato 24v Lighting Wire Upgrade

Towing Equipment Options

• Bow Samson Post
  

  Offered on Impact models. Used for mooring; aluminum powder coated bow post thru-bolted to forward deck platform using stainless steel screws.

• Engine Crash Rail- Outboard W/ Removeable Hoop
• Tow Post
  

  Rugged, simple, heavy-duty post for select 17' to 27' boats. Bolts to reinforced areas within the hull. Strut tubes (19' to 25') attach above the bit for added strength and to prevent the tow line from swinging amidships. Three-bolt attachment system permits easy removal when not required. Installation varies for models, sizes and options. For boats with single engine installation only. Consult factory.

• Tow Rail Tower
  

  Tow rail tower with mounting space for radar and floodlights. Snap-back screen included. Available for 27' models.

• Tow System W/Dive Bottle, Impact Ribs Only

Commissioning Gear Options

• 20" Uscg Ring Buoy And Bracket
• 3/8" Black Mooring Lines 25' Long (Each)
• Boat Hook
• Boat Owners Manual: In Accordance With Iso 10240. All Units To Be Stated In English Units In Addition To Metric
• Diagnostic Equipment For Engines, Includes Fully-Rugged Panasonic Toughbook 30 And Documentation Of Initial Set-Up (Brp) (Ea)
• Diagnostic Equipment For Engines, Includes Fully-Rugged Panasonic Toughbook 30 And Documentation Of Initial Set-Up (Mercury)(Ea)
• Diagnostic Equipment For Engines, Includes Fully-Rugged Panasonic Toughbook 30 And Documentation Of Initial Set-Up (Yamaha) (Ea)
• Fender, Black With Dedicated Storage (Ea)
• Fortress Fx 11 Anchor And Stowage W/Chain And 150' Line
• Licensed Professional Engineering Review, Approval, Signing, And Dating Of Certification Documentation For Lifting System. Includes Copies Of OEM Test Documents/Certifications As Supplied With Sling.
• Life Vest, Type II, Black, Adult Size, Auto Inflatable (Ea)
• Life Vest, Type II, Black, Adult Size (Ea)
• Paddle, 5', T-Handle, With Dedicated Storage (Ea)
• Safety and Commissioning Package For Four People
  

  Consists of: commercial-grade life vests (PFDs); galvanized anchor with coated chain and pre-spliced, double-braided anchor line; fenders; pre-spliced double braided dock lines; throw cushion; one boat hook; one paddle; one air horn; one refill for air horn; one flare kit; one first-aid kit. Quantities, sizes and lengths depend on boat length. Consult factory for details.

• Spares, Tools And Items Needed To Service Boat And Engine: Provided With Pricing List (Separate Attachment W/ Oem Part Numbers and Descriptions).
• Technical Data And Documentation: As-Built Construction Drawings And Technical Information Essential For Review, Repairs, And Supply Support
• Tow Line, 5/8" X 250'

Shipping Options

• Shipping Cradle
  

  A simple skid for storing boat on a level plane or when a trailer is not ordered. Required for ocean-freight shipments.

Submit Your Boat

Fields marked with * are required