Choose features for the 22' Guardian

Standard Features
Standard Features options
Required

Options also required with your selection

Conflict

Options that cannot be combined with your selection
- 10-year limited hull warranty (standard)
  x
- 30" transom (standard)
  x
- 75-gallon baffled aluminum fuel tank (standard)
  x
- Anchor storage locker (standard)
  x
- Automatic Electric Bilge Pump (standard)
  x
- Bow eye / lifting eye (standard)
  x
- Fiberglass J20 console with windshield and grab rail (standard)
  x
- Fire extinguisher (standard) • Fire extinguisher Larger models have 2 or 3 depending on model size
  x
- Forward belowdeck storage compartment with aluminum hatch and bilge pump (standard)
  x
- Haze grey gelcoat (standard) • Haze grey gelcoat
  x
- Heavy-duty rub rail (standard)
  x
- Hydraulic Steering (standard)
  x
- In-deck bow storage with drain (standard)
  x
- Self-bailing hull with scuppers (standard)
  x
- Stern eyes (standard)
  x
- Trim tabs (standard) • Trim tabs Electric with indicator switch pael
  x
- Unsinkable hull with commercial-grade fiberglass laminate (standard)
  x
Heavy Duty Hull Equipment
Heavy Duty Hull Equipment options
Required

Options also required with your selection

Conflict

Options that cannot be combined with your selection
- Bottom paint • Bottom paint
  x
- Custom Hull Color • Custom Hull Color Hull exterior and/or interior can be any color your agency or department requires.
  x
- Gunwale lifting eyes • Gunwale lifting eyes Four stainless steel lifting plates sized for 1 1/8 inches shackles. Thru-bolted using five 5/16 inches stainless steel bolts. Hull area substantially reinforced with additional fiberglass laminate. Aluminum inserts provide enhanced pull-out security. Highly recommended for shipboard applications. Factory installed only.
  x
- Heavy duty rubbing strakes • Heavy duty rubbing strakes Choice of 1 per side or 2 per side. Large rubber "D" sections bolted through hull. Flexible enough to absorb impact. Protects hull when lying alongside ships or low piers.
  x
- High/Low Bow and Side Rails • High/Low Bow and Side Rails Heavy-duty welded aluminum pipe. Rails secured to hull with 316L grade stainless steel machine screws tapped into 1/2 inches phenolic inserts laminated into the hull. Length varies per model. Forward section is low to facilitate work over the side. Amidships section elevated to provide ergonomic handhold. All-welded construction adds strength and prevents water intrusion. Factory installed only.
  x
- Lashing rails • Lashing rails Heavy-duty welded 3/4" aluminum rail thru-bolted to hullside of cockpit interior. Cargo and loose gear can be tied off or secured to rail. All-welded construction adds strength and prevents water intrusion. Requires installation of rubbing strakes. Set of two. Powder-coated black. Other colors available. Factory installed only.
  x
- Low Bow Rails • Low Bow Rails Heavy-duty welded aluminum pipe. Rails secured to hull with 316L grade stainless steel machine screws tapped into 1/2 inches phenolic inserts laminated into the hull. Length varies per model. Rail provides handhold in bow area with a low profile to facilitate work over the side. All-welded construction adds strength and prevents water intrusion. Available on most models. Powder-coated haze grey. Other colors available. Factory installed only.
  x
- Painted hull lettering • Painted hull lettering Up to 15 characters per side
  x
- Painted hull slash • Painted hull slash A one or two color angled slash painted on hull sides. High quality paint provides durable finish. Customer to specify color. Hull drawing provided for size and placement.
  x
- Radial Arm Davit • Radial Arm Davit Includes Block, Cable and Hook. Choice of manual or electric winch.
  x
- Recessed floor tie-down • Recessed floor tie-down Heavy-duty welded aluminum tie-downs fitted flush into cockpit decks. The tie-downs are powder-coated measure approximately 4 inches by 4 inches and are secured with stainless steel machine screws to phenolic inserts laminated into the deck. Factory installed only. Priced per item. Specify location.
  x
- Springline Cleats • Springline Cleats Set of 2 cleats located at midships for ease of tying up.
  x
- Stainless Steel Cutwater • Stainless Steel Cutwater Heavy-duty 1/8 inches 316L grade stainless steel plating is shaped to fit keel. Approximately 8 inches wide (4 inches either side of keel) and 6' long. Designed to protect keel from damage during beaching. Hull has additional laminate for installation and extra strength. Available on most models. Powder-coated black. Factory installed only.
  x
- Stainless steel bow eye reinforcement • Stainless steel bow eye reinforcement Heavy duty 1/8" 316L grade stainless steel plating is shaped to fit keel in bow eye location. Approximately 8" wide and 10" long. Designed to prevent bow eye from loosening during towing operations. Hull has additional laminate for installation and extra strength. Available on most models. Powder coated black. Factory installed only.
  x
- Stainless steel transom chafe cap • Stainless steel transom chafe cap Powder-coated, flat black, stainless steel cap that covers aft edge of transom to reduce risk of fiberglass damage from repeated engine changes.
  x
- Stainless steel transom corner chafe plates • Stainless steel transom corner chafe plates Heavy-duty 1/8 inches 316L grade stainless steel plating is shaped to fit transom corners from rub rail to waterline. Designed to protect transom corners from damage. Hull has additional laminate for installation and extra strength. Powder-coated black. Factory installed only.
  x
Console and Steering
Console and Steering options
Required

Options also required with your selection

Conflict

Options that cannot be combined with your selection
- Aluminum Console • Aluminum Console Welded aluminum console powdercoated to match interior hull color. Includes integrated handrails, a large electronics flat or enclosure, and locking aluminum access door. Features shown on pictured console will vary according to options.
  x
- Hydraulic tilt steering
  x
- J20 Fiberglass Console (standard) • J20 Fiberglass Console Fiberglass console is secured with stainless steel machine screws tapped into half-inch phenolic inserts laminated into the hull or thru-bolted to the deck (depends on the model). Features include black powder coated, heavy-duty 1-inch aluminum powder-coated hand rail thru-bolted to console, tinted acrylic windscreen, locking composite console access door; interior and exterior courtesy lights, 2 drink holders, molded-in compass flat; electronics flat with the ability to accommodate dual screens, incorporated footrest with non-skid.
  x
- Large Fiberglass Console
  x
- Medium Fiberglass Console
  x
- Twin Cylinder Steering Upgrade
  x
Engine and Drive System
Engine and Drive System options
Required

Options also required with your selection

Conflict

Options that cannot be combined with your selection
- Gauge Package
  x
- Manual Fuel Tank Sounder
  x
- Outboard engine - Evinrude • Outboard engine - Evinrude Contact a representative to determine optimal engine configuration based on intended use, performance requirements, and additional options selected.
  x
- Outboard engine - Honda • Outboard engine - Honda Contact a representative to determine optimal engine configuration based on intended use, performance requirements, and additional options selected.
  x
- Outboard engine - Mercury • Outboard engine - Mercury Contact a representative to determine optimal engine configuration based on intended use, performance requirements, and additional options selected.
  x
- Outboard engine - Yamaha • Outboard engine - Yamaha Contact a representative to determine optimal engine configuration based on intended use, performance requirements, and additional options selected.
  x
- Racor Fuel / Water Separator Upgrade
  x
- Sea trial & systems check • Sea trial & systems check Tests performed at BCGP facility and in nearby waterways.
  x
- Stainless propellers
  x
- Twin outboard engine installation • Twin outboard engine installation Contact sales rep for optimal configuration based on other options chosen and performance requirements.
  x
Navigation and Safety
Navigation and Safety options
Required

Options also required with your selection

Conflict

Options that cannot be combined with your selection
- Analog compass • Analog compass Analog, flush mount recommended on 17' and larger models. Well dampened for rough-water use. Backlit, with compensation adjustment. 4 1/2 inches power damp dial.
  x
- Cockpit Light • Cockpit Light For mounting under cockpit gunnels or cabin overheads. Subdued red light reduces loss of night vision. Individually switched or wired to dash panel.
  x
- Cockpit floodlight • Cockpit floodlight Hardtop mounted.
  x
- Digital Compass • Digital Compass KVH Azimuth 1000 Digital Fluxgate
  x
- Electronics package - Furuno • Electronics package - Furuno Contact a representative to determine optimal electronics configuration based on intended use.
  x
- Electronics package - Garmin • Electronics package - Garmin Contact a representative to determine optimal electronics configuration based on intended use.
  x
- Electronics package - Raymarine • Electronics package - Raymarine Contact a representative to determine optimal electronics configuration based on intended use.
  x
- Fire Extinguisher Upgrade • Fire Extinguisher Upgrade Available in 2 lb or 5 lb capacity. 2 lb capacity not available on models larger than 17'.
  x
- Handheld spotlight • Handheld spotlight Handheld with aase and 12-Volt outlet
  x
- Navigation lights
  x
- Remote control spotlight • Remote control spotlight Choice of 200,000 or 80,000 CP
  x
Seating And Storage
Seating And Storage options
Required

Options also required with your selection

Conflict

Options that cannot be combined with your selection
- Aluminum Leaning Post (standard) • Aluminum Leaning Post Aluminum leaning post with additional reinforcement to endure grueling commercial use. Cushioned with lockable sliding storage doors aft.
  x
- Aluminum Leaning Post with Gunrack/Storage • Aluminum Leaning Post with Gunrack/Storage Includes doors, grabrail, and bolster
  x
- Fiberglass Bench Seat/Leaning Post • Fiberglass Bench Seat/Leaning Post Developed originally to carry combat troops, this rugged seat system can also be used when extra seating or storage is required. Measures 40 inches wide and is 65 inches long. Each seat has a wide floor-mounting flange and four or more plastic access doors. Fits 22' and larger Guardians, and 26' Justice. Includes leaning post pad and large seat cushion. (56 inches long)
  x
- Folding Aft Quarter Aluminum Jump Seats (2)
  x
- Pedestal seat • Pedestal seat Rotationally molded of tough UV resistant white polyethylene, marine-grade white quilted vinyl, snap-on removable cushions; tee-nut bottom inserts accept anodized support rails that make it compatible with most pedestals, swivel and fore and aft seat slides.
  x
- Shock Mitigating Seat
  x
- Tubular Aluminum Leaning Post • Tubular Aluminum Leaning Post 36" in length, W/ Grabrail
  x
Law Enforcement
Law Enforcement options
Required

Options also required with your selection

Conflict

Options that cannot be combined with your selection
- Flush Mount Siren W/ Amp
  x
- Flush Mount Strobe W/ Built-In Siren & Amp • Flush Mount Strobe W/ Built-In Siren & Amp Ideal for the front side of consoles, this high-powered siren has the same sound quality as the streamlined siren. Protrudes only 1 1/2 inches from the surface and houses a powerful 3 inches by 7 inches blue strobe. Amplifier with weathertight enclosure mounted inside console. Uses noise canceling microphone and has 100-watt PA wail, yelp, horn and manual siren functions.
  x
- LED Light Series • LED Light Series Available in blue or red.
  x
- LED Strobe Light
  x
- Siren W/ Amplifier • Siren W/ Amplifier Choice of Streamlined or Flushmount
  x
- Strobe Light • Strobe Light Choice of Amber, Red, or Blue Lens
  x
- Whelen LED Mini-Edge W/ Siren, PA, AMP
  x
- Whelen Light Bar
  x
- Whelen Light Bar W/ Siren, PA & Amplifier
  x
Weather Protection
Weather Protection options
Required

Options also required with your selection

Conflict

Options that cannot be combined with your selection
- Canvas Cover For Leaning Post
  x
- Canvas Cover for Console • Canvas Cover for Console Can accomodate either aluminum or fiberglass consoles
  x
- Canvas Mooring Cover
  x
- Canvas Weather Curtain System • Canvas Weather Curtain System Optional for the medium-duty or heavy-duty t-top. Completely encloses the operator with forward, rear, port (medium-duty part has four pieces) and starboard drop curtains. Composed of rugged acrylic material with non-corrosive zippers and snaps. On models less than 25', trim tabs are recommended to correct for list caused by strong crosswinds and to prevent wind-induced porpoising at high speeds.
  x
- Heavy Duty T-Top
  x
- Suntop With Boot • Suntop With Boot A ruggedly simple method of providing sun protection for center console models. Fabric is a durable acrylic material that is fade resistant. Bows are stainless steel. Generally, this top is centered over the driver, providing fore and aft shade. May be easily retrofitted in the field. Available for all models except Challengers and Vigilants.
  x
Diving and Rescue Equipment
Diving and Rescue Equipment options
Required

Options also required with your selection

Conflict

Options that cannot be combined with your selection
- Dive / Rescue Door • Dive / Rescue Door For 19' and larger models, this cutout lowers entry freeboard. Door openings are molded into hull (in the molding process) providing a homogeneous and smooth transition into boat. Installed in port side only. Includes aluminum gunnel option on some models. Self-bailing scupper package included. Factory installed only. The insert door slides on nylon tracks into the cutout opening and clamps down. Gasketed bottom edge reduces leaks and heavy-duty hooks hold door in place. High-density foam is inserted to prevent it from sinking. When cutout is in use, insert door is stored against the opposite gunnel in nylon chocks. Available in 34", 45", or 60" sizes.
  x
- Dive Ladder
  x
- Dive Tank Rack • Dive Tank Rack Welded aluminum or removable racks, mounted in the cockpit or bow area, can hold 3 or 6 bottles.
  x
- Engine Crash Rail • Engine Crash Rail Powder coated aluminum to protect the engines and boat while towing. All-welded construction prevents water intrusion and provides superior strength.
  x
- Floor Matting • Floor Matting A cushion-type mat that covers the floor using 1/2 inches thick matting. Open pattern allows water to drain through matting and aft into drains. Connected together with special connectors.
  x
- Freshwater Shower
  x
- Raw water wash down system
  x
- Rescue Rails • Rescue Rails Rugged 1" powdercoated aluminum rails feature welded construction, oversize mounting and backing pads and stainless steel bolts. When dive door is ordered, rail is split.
  x
- Torsional Tow Bar • Torsional Tow Bar Tow bar spans across gunwales. Bolts through gunwales for strength. May require aluminum gunwale upgrade on some models. Contact representative for details.
  x
- Torsional Tow Bar Take Up Reel • Torsional Tow Bar Take Up Reel Heavy-duty reel holds up to 250' of 5/8" double-braid tow line. Nylon axle bushing for easy movement and removable crank handle that fits either end.
  x
- Torsional tow bar with tower • Torsional tow bar with tower The same basic foundation as the popular torsion tow bar and extends upward to provide an elevated platform for lights, antennas, etc. Aluminum pipe bolted through the gunwale. A folding upper half and snap-back screen are available options.
  x
- Tow Post
  x
Electrical Accessories
Electrical Accessories options
Required

Options also required with your selection

Conflict

Options that cannot be combined with your selection
- 12 Volt Outlet
  x
- Battery Charger • Battery Charger For 1 To 3 Banks (Requires Appropriate Shore Power Option)
  x
- Shore Power • Shore Power Available in 110vac/60hz, 220V/60HZ or 220V/50HZ
  x
- Solar Charging System • Solar Charging System For charging batteries using solar power. Includes 80-watt solar array that can be mounted on T-top or elsewhere on the boat. 15 Amp charge controller with an LCD digital meter display.
  x
Firefighting
Firefighting options
Required

Options also required with your selection

Conflict

Options that cannot be combined with your selection
- 20hp Darley Fire Pump • 20hp Darley Fire Pump Available in aft or forward mount and intake
  x
- 46 Hp Cet Fire Pump System - Aft Intake Aft Mount
  x
- RF Remote Nozzle (Non-Foaming)
  x
- Remote Monitor • Remote Monitor Does Not Include Rf Nozzle
  x
Trailer
Trailer options
Required

Options also required with your selection

Conflict

Options that cannot be combined with your selection
- Aluminum Trailer • Aluminum Trailer Designed for heavy-duty applications, each trailer is created and fitted for each Boston Whaler hull size. This ensures proper hull support, balance and safety both on the highway and when launching or retrieving boats.
  x
- Galvanized Trailer • Galvanized Trailer Designed for heavy-duty applications, each trailer is created and fitted for each Boston Whaler hull size. This ensures proper hull support, balance and safety both on the highway and when launching or retrieving boats.
  x
Special Purpose Equipment
Special Purpose Equipment options
Required

Options also required with your selection

Conflict

Options that cannot be combined with your selection
- 7.62 Ammo Can Bench Seat Storage Shelf • 7.62 Ammo Can Bench Seat Storage Shelf Two storage shelves; one is mounted on the tripod gun plate and the other on the tripod. Each stores two .50 caliber NATO ammo cans. Includes hold-down straps for the cans. (NATO .50 caliber for MK16 Tripod)
  x
- Bow Mounted Mk16 Mod2 Tripod • Bow Mounted Mk16 Mod2 Tripod This rugged stainless steel tripod is designed for 7.62 and .50-caliber machine guns or the 40mm MK19 grenade launcher. Comes with a bronze socket and train stops. Gun cradle must be ordered separately. When installed, the deck and hull structure is heavily reinforced with additional fiberglass and aluminum inserts and frequently an aluminum deck plate. Because of strength requirements, factory installation only.
  x
- Deck Mounted 7.62mm Ammo Can Rack • Deck Mounted 7.62mm Ammo Can Rack Nato Mk19 40mm Grenade (2 Cans)
  x
- Nato .50 Cal Ammo Can Mk16 Tripod Storage Shelves • Nato .50 Cal Ammo Can Mk16 Tripod Storage Shelves Holds 5 Cans
  x