Standard Features

• 10" cleats (6) (standard)
• 10-year limited hull warranty (standard)
• 200-gallon baffled aluminum fuel tank (standard)
• 36" heavy-duty aluminum leaning post with lockable door, shelf and grab rail (standard)
• Anchor locker with fiberglass cover and drain (standard)
• Bilge pumps with automatic float switches (2) (standard)
• Black identification and trim markings (standard)
• Bow eye / lifting eye (standard)
• Electric trim tabs (standard)
• Fiberglass J21 console with storage area, door, forward seat, windshield, grab rail and interior courtesy lights (standard)
• Fire extinguishers (2) (standard)
• Forward belowdeck storage compartment with aluminum hatch and bilge pump (standard)
• Haze grey gelcoat (standard)
• Heavy-duty rub rail (standard)
• Integrated swim platform with folding ladder (standard)
• J21 Console (standard)
• Lockable quarter compartments (standard)
• Navigation lights (standard)
• Self-bailing hull with scuppers (standard)
• Stern eyes (standard)
• Stern splashwell bulkhead (standard)
• Switch panel - bilge (2), navigation lights and auxiliary (4) (standard)
• Unsinkable hull with commercial-grade fiberglass laminate (standard)

Heavy Duty Hull Equipment Options

• Electric Winch For Davit
• Extra Heavy Duty Rubbing Strakes (1 per side)
  

  Large 3 inches rubber sections bolted through hull. Flexible enough to absorb impact. Protects hull when lying alongside ships or low piers. Rubbing strakes are required when ordering lashing rails. (one per side)

• Extra Heavy Duty Rubbing Strakes - (2 Per Side)
  

  Two large 3 inches rubber sections bolted through each side of hull. Flexible enough to absorb impact. Protects hull when lying alongside ships or low piers. Rubbing strakes are required when ordering lashing rails. (two per side)

• Extra Heavy Duty Rubbing Strakes W/ Dive Door - (1 Per Side)
• Extra Heavy Duty Rubbing Strakes W/ Dive Door - (2 Per Side)
• Extra Heavy Duty Vertical / Angle Rubstrakes
  

  Large 3 inches rubber sections bolted through each side of the hull. Absorbs impact and protects hull when lying alongside ships or low piers. Rubbing strakes are required when ordering lashing rails. Available on most models.

• Gunwale Lifting Eyes (4)
  

  Stainless steel lifting plates sized for 1 1/8 inches shackles. Thru-bolted using five 5/16 inches stainless steel bolts. Hull area substantially reinforced with additional fiberglass laminate. Aluminum inserts provide enhanced pull-out security. Highly recommended for shipboard applications. Factory installed only.

• HD Rubbing Strakes (1 per side)
• HD Rubbing Strakes (2 per side)
• HD Rubbing Strakes W/ Dive Door - (1 Per Side)
• HD Rubbing Strakes W/ Dive Door - (2 Per Side)
• Heavy Duty Recessed Floor Tie Down (1)
  

  Heavy-duty welded aluminum tie-downs fitted flush into cockpit decks. The tie-downs are powder-coated measure approximately 4 inches by 4 inches and are secured with stainless steel machine screws to phenolic inserts laminated into the deck. Factory installed only. Priced per item. Specify location. (each)

• High Pattern Bow Rail W/ Center Boarding Rails
  

  Heavy-duty welded aluminum 1 1/4 inches pipe. Rails secured to hull with 316L grade stainless steel machine screws tapped into 1/2 inches phenolic inserts laminated into the hull. Length varies by model. Rail provides secure handholds forward and amidships. Forward section is open to facilitate boarding over the bow. All-welded construction adds strength and prevents water intrusion. Available on most models. Powder-coated haze grey. Other colors available. Factory installed only.

• High Pattern Side Rails
  

  Heavy-duty welded aluminum pipe. Rails secured to hull with 316L grade stainless steel machine screws tapped into 1/2 inches phenolic inserts laminated into the hull. Length varies per model. Rail provides secure ergonomic handhold amidships. All-welded construction adds strength and prevents water intrusion. Available on most models. Powder-coated haze grey. Other colors available. Factory installed only.

• HI-Low Bow / Side Rails
  

  Heavy-duty welded aluminum pipe. Rails secured to hull with 316L grade stainless steel machine screws tapped into 1/2 inches phenolic inserts laminated into the hull. Length varies per model. Rail provides secure handholds forward and amidships. Forward section is low to facilitate work over the side. Amidships section elevated to provide ergonomic handhold. All-welded construction adds strength and prevents water intrusion. Available on most models. Powder-coated haze grey. Other colors available. Factory installed only.

• Hi-Low Bow/ Side Rails W/ Dive Door
• Hull Side Foam Fendering System W/ Dive Door
• Hull Side Foam Fender System
• Lashing Rails (Rub Stake Required)
  

  Heavy-duty welded 3/4 inches aluminum pipe thru-bolted to hull. Length varies per model. Cargo and loose gear can be tied off or secured to rail. All-welded construction adds strength and prevents water intrusion. Requires installation of rubbing strakes. Set of two. Available on most models. Powder-coated black. Other colors available. Factory installed only. (rubbing strake required)

• Lashing Rails W/Dive Door (Rub Strake Required)
• Lifting Sling Set W/Load Test And Certification Documentation
• Low Pattern Bow Rails
  

  Heavy-duty welded aluminum pipe. Rails secured to hull with 316L grade stainless steel machine screws tapped into 1/2 inches phenolic inserts laminated into the hull. Length varies per model. Rail provides handhold in bow area with a low profile to facilitate work over the side. All-welded construction adds strength and prevents water intrusion. Available on most models. Powder-coated haze grey. Other colors available. Factory installed only.

• Low Pattern Rails W/ Dive Door
• Radial Arm Davit
• Radial Arm Davit W/ Manual Winch, Block, Cable, and Hook
  

  A sturdy aluminum pipe davit that will fit 18' and larger models as well as the 17' Guardian. Designed for lifting objects up and over the gunnel. A socket at the gunnel level and a base plate on the cockpit floor allow this davit to be easily removed. Reaches out approximately 24 inches from rub rail. Because of special inserts and heavier laminates, this option is only available factory-installed. Rated for 250 pounds. Other custom davits with heavier ratings are available. (includes manual winch with block and tackle)

• Recessed Floor Tie Down (1)
  

  Light-duty tie-downs fitted flush into the decks of all models except Alerts. Tie-downs measure approximately 2 inches by 3 inches and have lift-up handles to secure items on the floor. Option is factory installed only. Priced per item. Specify location. (each)

• Springline Cleats (2)
• Stainless Steel Bow Eye Reinforcement
• Stainless Steel Cutwater
  

  Heavy-duty 1/8 inches 316L grade stainless steel plating is shaped to fit keel. Approximately 8 inches wide (4 inches either side of keel) and 6' long. Designed to protect keel from damage during beaching. Hull has additional laminate for installation and extra strength. Available on most models. Powder-coated black. Factory installed only.

Hull Coloring, Lettering and Paint Options

• Boat ID Numbers (Vinyl) & Plate
• Bottom Paint
• Custom Color- Hull Exterior
• Custom Color- Hull Interior
• Painted Hull Lettering (up to 15 characters per side)
  

  One-color letters / numbers painted on hull sides (up to 15 characters per side). High-quality paint provides durable finish. Customer to specify color font and text. Hull drawing provided upon request showing placement width and size of text. (up to 15 characters per side)

• Painted Hull Slash- 1 color
  

  A one- or two-color angled slash painted on hull sides. High-quality paint provides durable finish. Customer to specify color. Hull drawing provided for placement width and size of slash to configure additional graphics. Boat number must be supplied by the customer.

• Painted Hull Slash- 2 color
  

  A one- or two-color angled slash painted on hull sides. High-quality paint provides durable finish. Customer to specify color. Hull drawing provided for placement width and size of slash to configure additional graphics. Boat number must be supplied by the customer.

Engine Equipment / Installation Options

• 3 Gallon Bombardier Oil Tank
• 3 Gallon Mercury Oil Tank
• 3 Gallon Yamaha Oil Tank
• Bombardier Dual Engine Pre-Rig W/O Gauges
• Brp E-Tec Dual Engine I-Command Digital Gauges
• Builders Trials & Systems Check with Customer At EC Facility
• Dual Engine Installation & Performance Verification
• Honda Dual Engine Pre-Rig W/O Gauges
• Mercury Dual Engine Pre-Rig W/O Gauges
• Mercury Dual Engine Verado Pre-Rig W/DTS & Smartcraft
• Propeller, Stainless V-4's
• Propeller, Stainless V-6's
• Racor Fuel / Water Separator Upgrade (1)
• Virtual Lifeline wireless emergency engine shut off device- Dual O/B Eng
• Yamaha Dual Engine Pre-Rig W/O Gauges
• Yamaha Pre-Rig Dual "Dec"

Gauge and Light Options

• Bombardier Dual Engine Gauge Package
• Bombardier Oil Level Gauge
• Bombardier Speedometer (1)
• Bombardier Water Pressure Gauge (1)
• Bow Docking Lights
• Cockpit Light- Red (1)
  

  For mounting under cockpit gunnels or cabin overheads. Subdued red light reduces loss of night vision. Individually switched or wired to dash panel. (red)

• Floodlight (1)
  

  Designed to flood working areas with a 50-watt halogen diffused light spread over a large area. Non-corrosive black casing and durable stainless steel bracket for easy mounting on roofs, towers, masts, etc. Measures only 7 inches wide by 5 1/2 inches high by 4 inches deep. Frequently mounted in pairs for added dependability.

• Honda Dual Engine Gauge Package
• Honda Water Pressure Gauge (1)
• Mercury Dual Engine Analog Gauge Package
• Mercury Dual Engine Smartcraft Gauge Package
• Mercury Dual Engine Vessel View Gauge Package - Opti
• Mercury Oil Tank Level Gauge (1)
• Mercury Speedometer (1)
• Mercury Water Pressure Gauge (1)
• Push To Start Panel Upgrade - Dual Engine
• Spotlight, Handheld W / Base and 12-Volt Outlet
  

  Hand-held waterproof spotlight (black 6 inches case) with 2 Halogen light bulbs, 55-watt for close-in range and 100-watt long-range, switched independently. Electrical connection: spiral cable leading out of handle, extended length approximately 3.5 m, with universal plug for connection to socket or cigarette lighter. Comes with mounting bracket and 12-volt outlet.

• Vessel View Gauge Upgrade - Dual Eng Verado
• Yamaha Dual Engine Gauge Package
• Yamaha Dual Gauge "Dec"
• Yamaha Fuel Management Gauge
• Yamaha Hourmeter (1)
• Yamaha Water Pressure Gauge (1)
• Yamaha Water Temperature Gauge (1)

Electrical Accessories Options

• 12V DC Converter 9 Sure Power P/N 522040
• 12 Volt Outlet
• Battery Charger For 1 To 3 Banks (Requires Appropriate Shore Power Option)
• Battery System For Dual Engines, Two Starting Batteries And One Aux Battery (Does Not Include Batteries)
• Battery System For Dual Engines, Two Starting Batteries And Two Aux Batteries (Does Not Include Batteries)
• Battery System For Dual Engines, Two Starting Batteries (Does Not Include Batteries)
• Dynoplate Bonding System To Include 6" X 18" Plate And Connection To Craft Bonding System
• Electrical Distribution Panel With Circuit Breakers For Electronics
• Electronic Cables And Conductors Supported By (Cres) Stainless Steel Supports/Cres Banding With Chaffing Protection. (Except In electrical enclosures and cabin/console)
• Extended Switch Panel Upgrade - Bilge/Nav/8 Aux
• Maintenance Free, Wet Cell Deep Cycle Battery, Group 27, 115 Amp Hr
• Maintenance Free, Wet Cell Starting Battery, Group 24, 1000 Mca
• Optima 34m-1000 Mca (Agm) - Engine Starting Battery
• Optima D34m-870 Mca Deep Cycle (Agm) - Auxilary Battery
• Shore Power 110vac/60hz
• Shore Power 220vac/50hz
• Shore Power 220vac/60hz
• Transducer Upgrade Thruhull
• Upgraded Switch Panel And Circuit Breakers To Include Airpax Breakers
• Verado Engine Starting Battery (Agm-1110) Required For All Verados

Navigation and Safety Options

• 5 LB Fire Extinquisher
• Bilge Pump, Manual Diaphram Pump W/Overboard Discharge
• Compass, KVH Azimuth 1000 Digital Fluxgate
• Compass, Ritchie Helmsman (Flush / Gimbal Mount)
  

  Available in 17' to 27' models. Lighted for night-time operation. 4 inches in diameter, can be flush or gimbal mounted on 17' Justice. (flush or gimbal mount)

• Compass, Ritchie Navigator (Flush Mount)
  

  Flush mount recommended on 17' and larger models. Well dampened for rough-water use. Backlit, with compensation adjustment. 4 1/2 inches power damp dial. (flush mount)

• Engraved Instruction and Warning Label Package
• Spotlight, Acr Remote Control 200,000 Cp
  

  This compact, lightweight spotlight develops 200,000 candlepower in a very tight beam. Because of its durability and compact size, mast mounting is desirable, reducing looming effect on deck. Comes complete with touch pad control.

• Spotlight, Acr Remote Control 80,000 Cp

Fuel Systems Options

• Manual Fuel Tank Sounder

Console and Steering Options

• A10 Heavy Duty Welded Aluminum Console
  

  Welded, aluminum console constructed with 3/16 inches plate powder-coated to match interior hull color. Console is secured with stainless steel machine screws tapped into 1/2 inches phenolic inserts laminated into the hull or thru-bolted to deck (depends on model). Features include integrated hand rails welded to console, a large electronics enclosure (suitable for radar and other large display electronics) with lockable / removable clear acrylic door, an electronics box with flush-mount panel and lockable / removable acrylic door (for radios and smaller electronic equipment), locking watertight aluminum access door, interior courtesy light and recessed area for switches with clear acrylic drip shield. Console base measures approximately 36 inches wide by 44 inches deep. Height to top of console approximately 53 inches. Console is available as an option on larger center console models. Sized for dual-engine binnacle control. Features shown on pictured console will vary according to boat model. Please consult factory.

• A11 Heavy Duty Welded Aluminum Console W/ Fwd. Opening Door (Not Available With Aluminum Windscreen T-Top)
• Additional Watertight Aluminum Door For Aluminum Console
• Delete Standard Console
• G21 Console Folding Shelf Removable
• Hydraulic Steering (standard)
• Hydraulic Tilt Steering
• J20 Fiberglass Console
  

  Fiberglass console is secured with stainless steel machine screws tapped into half-inch phenolic inserts laminated into the hull or thru-bolted to the deck (depends on the model). Features include black powder coated, heavy-duty 1-inch aluminum powder-coated hand rail thru-bolted to console, tinted acrylic windscreen, locking composite console access door; interior and exterior courtesy lights, 2 drink holders, molded-in compass flat; electronics flat with the ability to accommodate dual screens, incorporated footrest with non-skid.

• Twin Cylinder Steering Upgrade

Propulsion and Drive System Options

• Blank No Engine (standard)
• Trim Tabs - Electric W/ Indicator Switch Panel (standard)

Seating Options

• 36" Alum Leaning Post W/ Doors, Grabrail, Gunrack/Strge
  

  Aluminum leaning post features lockable storage for shotguns and gear in the back of the seat. Available on most center console models 18' and larger.

• 36" Alum Leaning Post W/ Doors, Grabrail, Gunrack/Strge, Blstr
• 36" Alum Leaning Post W/ Storage Box & Ammo Can Ext. Lid
• 36" R6 Alum Leaning Post W/ Aft Storage Box
  

  Rugged, welded aluminum unit featuring our proven leaning post shape with a lockable storage box aft. Upper portion of leaning post includes a shelf with lockable / sliding Plexiglas doors and grab rail. Room below for batteries, VRO tank and more storage. Measures 36 inches wide by 30 inches fore and aft by 33 inches high. Cushions are removable. For Guardians 18' plus and other center-console models 21' and larger. Because of length, this unit may interfere with dive door opening on some models.

• 36" R6 Alum Leaning Post W/ Door (standard)
  

  Available on all center console models 21' and up. Features two lockable Plexiglas doors, a storage shelf, grab rail and removable cushion. Room inside for two batteries and / or 3-gallon VRO tank.

• 36" R6 Alum Leaning Post W/Door, Aft Storage Box & Backrest
• 36" R6 Alum Leaning Post W/ Door, Backrest, Footrest

  Backrest and footrest for an aluminum console. Welded construction, 3/16 inches aluminum.

• Delete Standard Seating
• Dual Pedestal Seats With Armrest
  

  Rotationally molded of tough UV resistant white polyethylene, marine-grade white quilted vinyl, snap-on removable cushions; tee-nut bottom inserts accept anodized support rails that make it compatible with most pedestals, swivel and fore and aft seat slides.

• Fiberglass Bench Seat/Leaning Post (56" Long)
  

  Developed originally to carry combat troops, this rugged seat system can also be used when extra seating or storage is required. Measures 40 inches wide and is 65 inches long. Each seat has a wide floor-mounting flange and four or more plastic access doors. Fits 22' and larger Guardians, and 26' Justice. Includes leaning post pad and large seat cushion. (56 inches long)

• Fiberglass Bench Seat/Leaning Post (82" Long)
  

  Developed originally to carry combat troops, this rugged seat system can also be used when extra seating or storage is required. Measures 40 inches wide and is 90 inches long. Each seat has a wide floor-mounting flange and four or more plastic access doors. Fits 22' and larger Guardians, and 26' Justice. Includes leaning post pad and large seat cushion. (82 inches long)

• Folding Aluminum Bench Seat For Front Of Aluminum Console
• Folding Aluminum Foot Platform For Leaning Post
• Stern Seat
  

  Full-width, folding and removable upholstered seat contoured to conform to boat interior. Backrest is low to allow easy access to stern and engine. Stern rail provides additional strength and stiffness. Available on all models 17' and larger.

• Tubular Aluminum Leaning Post W/ Grabrail- 36"
• Tubular Aluminum Leaning Post W/ Grabrail & Aft Seat- 36"
  

  This rugged, lightweight 36 inches-wide seat has room underneath for fuel tanks or small coolers. Welded aluminum construction. Upholstery is removable. For all center console models 16' and larger.

• Ullman Biscaya Seat W/Fiberglass Base
  

  Biscaya has a high backrest for maximum comfort and support. Longer saddle sides for optimal lateral support in straddling position. Extra padding on the front of the backrest and over its top. Zipped neoprene pouch for gear on backside of backrest. Two handles - wider support for passengers behind. Available on FRP bases for two seat heights 750 mm and 810 mm. All Ullman Seats are designed to protect the rider from getting injured. The seat design optimizes your body posture while the spring and damping system takes care of the high forces during impact.

Deck Cooler / Utility Box Options

• 162 Qt. Cooler With Cushion And Holddown
  

  Cooler comes with removable cushion, floor cleats and hold-down cords. Ideal for dry storage or iced beverages. Shipped factory installed or loose. (162-quart cooler, 41 inches long, 18 inches wide, 19 inches tall)

• 50" Alu Deck Utility Box with Cushion
  

  Rugged storage box has lockable cover and removable cushion. Heavy bases under box elevate it slightly above the floor for drainage. Fasteners are hidden inside to prevent removal when locked. Custom sizes for aluminum boxes available upon request. (Large-size aluminum, 50 inches wide, 18 inches deep and 13 inches high)

• 72 Quart Cooler with Cushion and Holddown
  

  Cooler comes with removable cushion, floor cleats and hold-down cords. Ideal for dry storage or iced beverages. Shipped factory installed or loose. (72-quart cooler, 34 inches long, 18 inches wide, 18 inches tall)

• 94 Quart Cooler With Cushion And Holddown
  

  Cooler comes with removable cushion, floor cleats and hold-down cords. Ideal for dry storage or iced beverages. Shipped factory installed or loose. (94-quart cooler, 33 inches long, 18 inches wide, 19 inches tall)

• Medium FRP Deck Utility Box with Cushion
  

  Rugged storage box has lockable cover and removable cushion. Heavy bases under box elevate it slightly above the floor for drainage. Fasteners are hidden inside to prevent removal when locked. Custom sizes for aluminum boxes available upon request.(Medium-size fiberglass, 36 inches wide, 18 inches deep and 13 inches high)

• Tapered Deck Utility Box W/ Cushion (Forward of Console) (Not Avail for all Consoles)
  

  Rugged storage box has lockable cover and removable cushion. Heavy bases under box elevate it slightly above the floor for drainage. Fasteners are hidden inside to prevent removal when locked. Tapered box is 22 inches wide in the front and 38 inches wide in the back, 18 inches deep and 13 inches high. Available for center-console models 17' and larger with select consoles; designed to fit in front of Guardian consoles. (forward of console and not available for all consoles)

Mast & Arch Options

• Radar Mast
• Strobe & Floodlight Mast (Aft of Seat) (Requires Aluminum Leaning Post)
  

  A rugged aluminum pipe suitable for mounting our 6 inches strobe and up to 3 floodlights. Hinges to the deck and can be lowered for low bridges or garage storage. When installed, the 360-degree anchor light is mounted on top so glare does not reflect down into the boat. Designed to mount against aluminum leaning posts. Lights and strobes are optional. For center console models 17' and larger. (aft of seat, requires aluminum leaning post)

• Strobe & Floodlight Mast (Deck Mount With Aft Bulkhead Clamp)
• Strobe & Floodlight Mast (Fwd of Console)
  

  Mast for mounting accessories. Mounts to forward side of console and folds forward to allow clearance while underway or trailering. Heavy-duty (schedule 40) aluminum, welded construction with a tough powder-coated finish. (forward of console)

• Strobe & Floodlight Mast, L/P W/ Backrest

Weather Protection Options

• Aluminum Console Windshild T-Top With Overhead Electronics Box (A10/A12 Console)
• Canvas Cockpit Suntent With Aluminum Bows
  

  Consists of two or more heavy-duty aluminum pipe bows inserted into gunnel-mounted sockets. Acrylic top is fade resistant and stiffened with fiberglass sail battens and tension wires. Forward end of top can stand alone or attach to windshield or aft end of cabin roof. Available for 22', 25' and 27' Guardians. Please consult factory before ordering.

• Canvas Cover For Aluminum Console
• Canvas Cover For Aluminum Leaning Post With Gun Rack and Storage Shelves
• Canvas Cover For Aluminum R6 Leaning Post
• Canvas Cover For Fiberglass Console Without T-Top
• Canvas Cover For Fiberglass Console With T-Top
• Canvas Cover For Fiberglass Pedestal Leaning Post
• Canvas Cover For Heavy Duty Aluminum Leaning Post With Backrest
• Canvas Cover For Heavy Duty Aluminum Leaning Post With Storage Box
• Canvas Cover For Heavy Duty Aluminum Leaning Post With Storage Box & Backrest
• Canvas Cover for Pedestal Seat
• Canvas Mooring Cover
• Canvas Mooring Cover for Craft W/ T-Top, Crash Rail & Engines
• Canvas Weather Curtain System For Heavy Duty T-Top (4 Pieces)
  

  Optional for the medium-duty or heavy-duty t-top. Completely encloses the operator with forward, rear, port (medium-duty part has four pieces) and starboard drop curtains. Composed of rugged acrylic material with non-corrosive zippers and snaps. On models less than 25', trim tabs are recommended to correct for list caused by strong crosswinds and to prevent wind-induced porpoising at high speeds. (Heavy-duty, four pieces)

• Canvas Weather Curtain System for Medium Duty T-Top (4 pieces)
  

  Optional for the medium-duty or heavy-duty t-top. Completely encloses the operator with forward, rear, port (medium-duty part has four pieces) and starboard drop curtains. Composed of rugged acrylic material with non-corrosive zippers and snaps. On models less than 25', trim tabs are recommended to correct for list caused by strong crosswinds and to prevent wind-induced porpoising at high speeds. (Medium-duty, four pieces)

• Canvas Weather Curtain System For Windscreen T-Top (3 Pieces)
• Cover For Stern Seat
• G21 Heavy Duty T-Top W/Radio Box With Lockable Door
• G21 Medium Duty T-Top W/Radio Box With Lockable Door
• Heavy Duty T-Top A-10 Alum Console
• J20 Heavy Duty T-Top W/ Radio Box With Lockable Door
• Suntop With Boot
  

  A ruggedly simple method of providing sun protection for center console models. Fabric is a durable acrylic material that is fade resistant. Bows are stainless steel. Generally, this top is centered over the driver, providing fore and aft shade. May be easily retrofitted in the field. Available for all models except Challengers and Vigilants.

Law Enforcement Equipment Options

• 6" Strobe Light W/ Amber Lens (1)
• 6" Strobe Light W/ Blue Lens (1)
• 6" Strobe Light W/ Red Lens (1)
• Flush Mount Siren W/ Amp
• Flush Mount Strobe W/ Built-In Siren & Amp
  

  Ideal for the front side of consoles, this high-powered siren has the same sound quality as the streamlined siren. Protrudes only 1 1/2 inches from the surface and houses a powerful 3 inches by 7 inches blue strobe. Amplifier with weathertight enclosure mounted inside console. Uses noise canceling microphone and has 100-watt PA wail, yelp, horn and manual siren functions.

• LED Light Series 400 Blue (QTY 1)
• LED Light Series 400 Red (QTY 1)
• LED Light Series 500 Blue (QTY 1)
• LED Light Series 500 Red (QTY 1)
• Streamlined Siren W/ Amplifier
  

  An attractive 100-watt siren for mounting in front of consoles (optional bracket required), on roofs or towers. Amplifier in weathertight enclosure to prevent internal corrosion. Remote face plate is non-corrosive and matches other Whaler switch panels. Manual siren button plus wail, yelp, PA and horn functions. Noise canceling microphone is detachable.

• Whelen 28" LED Mini-Edge Ultra Freedom W/ Siren, PA, AMP
  

  An attractive 100-watt siren for mounting in front of consoles (optional bracket required), on roofs or towers. Amplifier in weathertight enclosure to prevent internal corrosion. Remote face plate is non-corrosive and matches other Whaler switch panels. Manual siren button plus wail, yelp, PA and horn functions. Noise canceling microphone is detachable.

• Whelen 28" Strobe Mini-Edge 9M Series Light Bar
• Whelen 28" Strobe Mini-Edge 9M Series Light Bar W/ Siren, PA & Amplifier
• Whelen 48" LED Edge Ultra Freedom W/Siren, PA & Amp

  28” and 48” wide light bar features low-profile LED lights. Lights available in red, blue and amber. Includes siren, PA and amplifier (not shown). Ask for optional mounting locations.

• Whelen 48" Strobe Edge 9m Series Light Bar W/Siren, PA & Amplifier

Diving and Rescue Equipment Options

• Chafe Plate At Dive / Rescue Door Opening - 34"
  

  A rugged, natural-finish, stainless steel plate is inserted into the hull to prevent diver tanks, weights or other objects from chipping or chafing away fiberglass. Additional hull laminates provide thicker glass for attachment screws. Plate is bedded in place. Factory installed only.

• Dive Door Swimmers 13" Aluminum Handrails Forward & Aft Of Door (2)
• Dive Ladder For 34" Dive / Rescue Door
  

  Rugged welded aluminum ladder is designed to fit 34 inches, 45 inches, and 60 inches hull cutout only. Angled-step design and strong hand rails make it ideal for heavily laden divers coming on board. Top step is approximately 6 inches to 12 inches above waterline and bottom step is about 36 inches below. Note: Because of size, this ladder may require special brackets for storage. Please consult with factory for design and pricing. (for 34 inches cutout)

• Dive / Rescue Door - 34"
  

  For 19' and larger models, this cutout lowers entry freeboard. Door openings are molded into hull (in the molding process) providing a homogeneous and smooth transition into boat. Installed in port side only. Includes aluminum gunnel option on some models. Self-bailing scupper package included. Factory installed only. The insert door slides on nylon tracks into the cutout opening and clamps down. Gasketed bottom edge reduces leaks and heavy-duty hooks hold door in place. High-density foam is inserted to prevent it from sinking. When cutout is in use, insert door is stored against the opposite gunnel in nylon chocks.

• Floor Matting - Open Pattern
  

  A cushion-type mat that covers the floor using 1/2 inches thick matting. Open pattern allows water to drain through matting and aft into drains. Connected together with special connectors.

• Freshwater Shower
• Raw Water Wash Down System
  

  12-volt pump, sea suction and faucet outlet make saltwater washdowns convenient. For 18' and larger models.

• Removable Track Style Divers Tank Rack For 6 Bottles
  

  Three or six fold-up bottle holders for all models except Alert series and 17' Guardian. (for 6 bottles)

• Rescue Rails (Port & Starboard)
  

  Available for all models. Rugged 1 inches powder-coated aluminum rails feature welded construction, oversize mounting and backing pads and stainless steel bolts (four per pad). Note: When hull cutout is ordered the rail on the cutout side is split with a section forward and aft of the cutout. (pair)

• Rescue Rails W/Dive Door (Port & Starboard)
• Welded Aluminum Divers Tank Rack For 3 Bottles
  

  Three or six fold-up bottle holders for all models except Alert series and 17' Guardian. (for 3 bottles)

Fire Fighting Equipment Options

• 20hp Darley Fire Pump - Fwd Mount Pump & Fwd Intake
• 20hp Darley Fire Pump System - Aft Mount Pump & Aft Intake
• 3" Fire Pump Thru-Hull Intake W/Cap
• 4" Fire Pump Thru-Hull Intake W/Cap
• RF Remote Nozzle (Non-Foaming)
• Vulcan RF Remote Monitor (Does Not Include Rf Nozzle)

Special Purpose Equipment Options

• Ammo Can Storage, Nato Mk19 40mm Grenade (2 Cans)
• Bow Mounted Gun Plate W/ Hull Reinforcement For Mk16 Tripod (Does Not Include Tripod)
• Bow Mounted Mk16 Mod2 Tripod W/ Hull Reinforcement
  

  This rugged stainless steel tripod is designed for 7.62 and .50-caliber machine guns or the 40mm MK19 grenade launcher. Comes with a bronze socket and train stops. Gun cradle must be ordered separately. When installed, the deck and hull structure is heavily reinforced with additional fiberglass and aluminum inserts and frequently an aluminum deck plate. Because of strength requirements, factory installation only.

• Deck Mounted Nato 7.62mm Ammo Can Rack For Five Cans (2 Racks/10 Cans)
• Nato .50 Cal Ammo Can Mk16 Tripod Storage Shelves For 5 Cans
  

  62132: Shelf for bench seats is suitable for holding two NATO 7.62mm ammo cans per shelf. Up to four shelves can fit each bench. Available with the 6-10 man bench seat option. (NATO 7.62mm for bench seats)

• Nato 7.62 Ammo Can Bench Seat Storage Shelf For 2 Cans (2 Shelves/4 Cans)
  

  62126: Two storage shelves; one is mounted on the tripod gun plate and the other on the tripod. Each stores two .50 caliber NATO ammo cans. Includes hold-down straps for the cans. (NATO .50 caliber for MK16 Tripod)

• Quarter Mounted Modified Mk16 Mod2 Tripods With Hull Reinforcement (2 Bipods) (Requires Aluminum Gunwales)
  

  Same tripod as part number 62125, except one leg has been modified so that the tripod can rest on a heavily reinforced gunnel section. Includes stand with train stops but cradle (either 7.62, MK19 or .50 caliber) must be ordered separately. Because the total weight is not available on all models, please consult factory. (may require aluminum gunnel upgrade)

• Removable Quarter Mounted 7.62 Mm Pipe Pedestal Quarter Mount Assemblies (2 Pedestals)
• Weapon Mount Post Integrated Into Torsional Towbar With Plate And Hole Pattern Sized For Customer Installation Of Bronze Stand

Aluminum Trailer Options

• Customer Supplied Trailer Set-Up Charge
• Dual Pneumatic Caster Wheel Upgrade - Alum. Trailer
• Heavy Duty Aluminum Trailer W/Torsion Axles
  

  Designed for heavy-duty applications, each trailer is created and fitted for each Boston Whaler hull size. This ensures proper hull support, balance and safety both on the highway and when launching or retrieving boats.

• Led Trailer Lights
• Pintle Hitch W/Brake Actuator - Alum. Trailer
• Stainless Steel Caliper Assembly, Cylinder and Guide Pins
• Tie Down System, Boat To Trailer/Trailer To Aircraft
• Trailer Hitch W/Adj Plt/Lunette Eye/Ball Rcvr
• Trailer Military 7 Pin Plug

Galvanized Trailer Options

• Dual Pneumatic Caster Wheel Upgrade - Galv. Trailer
• Heavy Duty Galvanized Trailer
  

  Designed for heavy-duty applications, each trailer is created and fitted for each Boston Whaler hull size. This ensures proper hull support, balance and safety both on the highway and when launching or retrieving boats.

• Pintle Hitch W/ Brake Actuator - Galv. Trailer

Towing Equipment Options

• Engine Crash Rail- Outboard W/ Removeable Hoop
• Pusher Knee System
• Torsional Tow Bar
  

  Tow bar spans boat from gunnel to gunnel, allowing room underneath for pumps or deck utility boxes. Aluminum gunnel option recommended on some models. Bolts through gunnels for strength. For 18' to 26' models and 17' Justice. Order crash rail separately. (may require aluminum gunnel upgrade)

• Torsional Tow Bar Mounted Take Up Reel
  

  Heavy-duty reel holds up to 250' of 5/8 inches double-braid tow line. Nylon axle bushing for easy movement and removable crank handle that fits either end. Tower

• Torsional Tow Bar W/ Tower
  

  Starts with the same basic foundation as the popular torsion tow bar and extends upward to provide an elevated platform for lights, antennas, etc. Made from aluminum pipe bolted down through the gunnel. A folding upper half and snap-back screen are available options. For select models only; please consult factory. Factory installed only. (may require aluminum gunnel upgrade

Commissioning Gear Options

• 1200 Amp Booster Pack
• Diagnostic Equipment For Engines, Includes Fully-Rugged Panasonic Toughbook 30 And Documentation Of Initial Set-Up (Brp) (Ea)
• Diagnostic Equipment For Engines, Includes Fully-Rugged Panasonic Toughbook 30 And Documentation Of Initial Set-Up (Mercury)(Ea)
• Diagnostic Equipment For Engines, Includes Fully-Rugged Panasonic Toughbook 30 And Documentation Of Initial Set-Up (Yamaha) (Ea)
• Fender, Black With Dedicated Storage (Ea)
• Licensed Professional Engineering Review, Approval, Signing, And Dating Of Certification Documentation For Lifting System. Includes Copies Of OEM Test Documents/Certifications As Supplied With Sling.
• Life Vest, Type II, Black, Adult Size, Auto Inflatable (Ea)
• Life Vest, Type II, Black, Adult Size (Ea)
• Paddle, 5', T-Handle, With Dedicated Storage (Ea)
• Safety and Commissioning Package For Four People
  

  Consists of: commercial-grade life vests (PFDs); galvanized anchor with coated chain and pre-spliced, double-braided anchor line; fenders; pre-spliced double braided dock lines; throw cushion; one boat hook; one paddle; one air horn; one refill for air horn; one flare kit; one first-aid kit. Quantities, sizes and lengths depend on boat length. Consult factory for details.

• Tow Line, 5/8" X 250'

Shipping Options

• Shipping Cradle
  

  A simple skid for storing boat on a level plane or when a trailer is not ordered. Required for ocean-freight shipments.

Submit Your Boat

Fields marked with * are required