Standard Features

• 10" stainless steel cleats (2 bow, 2 spring, 2 stern with hawse pipes) (standard)
• 10-year limited hull warranty (standard)
• Acrylic entry door with lock (standard)
• Bow and stern eyes (standard)
• Cast stainless steel steering wheel (standard)
• Circuit breaker protection (standard)
• Cockpit courtesy lights (standard)
• Commercial switch panel (standard)
• Electric trim tabs (standard)
• Forward and aft bilge pumps with automatic floats (standard)
• Forward console seat with backrest and stainless steel rails (standard)
• Heavy-duty grab rail (standard)
• Heavy-duty rub rail (standard)
• Helm and companion flip-up bolster-style seats (standard)
• Integral swim platform with grab rail and stainless steel ladder (standard)
• Interior courtesy light (standard)
• Lockable electronics area (standard)
• Lockable storage under console with easy-clean liner (standard)
• Molded-in console foot rest (standard)
• Molded tempered glass windshield (standard)
• Self-bailing cockpit sole (standard)
• Stainless steel console grab rails (standard)
• Stainless steel toe rails (standard)
• Transom door with stainless steel latch (standard)
• Unsinkable heavy-duty hull (standard)
• Welded 316-L stainless steel low-profile interior rail (standard)

Heavy Duty Hull Equipment Options

• Extra Heavy Duty Rubbing Strakes (1 per side)
  

  Large 3 inches rubber sections bolted through hull. Flexible enough to absorb impact. Protects hull when lying alongside ships or low piers. Rubbing strakes are required when ordering lashing rails. (one per side)

• Extra Heavy Duty Rubbing Strakes - (2 Per Side)
  

  Two large 3 inches rubber sections bolted through each side of hull. Flexible enough to absorb impact. Protects hull when lying alongside ships or low piers. Rubbing strakes are required when ordering lashing rails. (two per side)

• Extra Heavy Duty Vertical / Angle Rubstrakes
  

  Large 3 inches rubber sections bolted through each side of the hull. Absorbs impact and protects hull when lying alongside ships or low piers. Rubbing strakes are required when ordering lashing rails. Available on most models.

• HD Rubbing Strakes (1 per side)
• HD Rubbing Strakes (2 per side)
• Heavy Duty Recessed Floor Tie Down (1)
  

  Heavy-duty welded aluminum tie-downs fitted flush into cockpit decks. The tie-downs are powder-coated measure approximately 4 inches by 4 inches and are secured with stainless steel machine screws to phenolic inserts laminated into the deck. Factory installed only. Priced per item. Specify location. (each)

• High Pattern Bow Rail W/ Center Boarding Rails
  

  Heavy-duty welded aluminum 1 1/4 inches pipe. Rails secured to hull with 316L grade stainless steel machine screws tapped into 1/2 inches phenolic inserts laminated into the hull. Length varies by model. Rail provides secure handholds forward and amidships. Forward section is open to facilitate boarding over the bow. All-welded construction adds strength and prevents water intrusion. Available on most models. Powder-coated haze grey. Other colors available. Factory installed only.

• High Pattern Side Rails
  

  Heavy-duty welded aluminum pipe. Rails secured to hull with 316L grade stainless steel machine screws tapped into 1/2 inches phenolic inserts laminated into the hull. Length varies per model. Rail provides secure ergonomic handhold amidships. All-welded construction adds strength and prevents water intrusion. Available on most models. Powder-coated haze grey. Other colors available. Factory installed only.

• HI-Low Bow / Side Rails
  

  Heavy-duty welded aluminum pipe. Rails secured to hull with 316L grade stainless steel machine screws tapped into 1/2 inches phenolic inserts laminated into the hull. Length varies per model. Rail provides secure handholds forward and amidships. Forward section is low to facilitate work over the side. Amidships section elevated to provide ergonomic handhold. All-welded construction adds strength and prevents water intrusion. Available on most models. Powder-coated haze grey. Other colors available. Factory installed only.

• Hull Side Foam Fender System
• Lashing Rails (Rub Stake Required)
  

  Heavy-duty welded 3/4 inches aluminum pipe thru-bolted to hull. Length varies per model. Cargo and loose gear can be tied off or secured to rail. All-welded construction adds strength and prevents water intrusion. Requires installation of rubbing strakes. Set of two. Available on most models. Powder-coated black. Other colors available. Factory installed only. (rubbing strake required)

• Low Pattern Bow Rails
  

  Heavy-duty welded aluminum pipe. Rails secured to hull with 316L grade stainless steel machine screws tapped into 1/2 inches phenolic inserts laminated into the hull. Length varies per model. Rail provides handhold in bow area with a low profile to facilitate work over the side. All-welded construction adds strength and prevents water intrusion. Available on most models. Powder-coated haze grey. Other colors available. Factory installed only.

• Recessed Floor Tie Down (1)
  

  Light-duty tie-downs fitted flush into the decks of all models except Alerts. Tie-downs measure approximately 2 inches by 3 inches and have lift-up handles to secure items on the floor. Option is factory installed only. Priced per item. Specify location. (each)

• Springline Cleats (2)
• Stainless Steel Bow Eye Reinforcement
• Stainless Steel Cutwater
  

  Heavy-duty 1/8 inches 316L grade stainless steel plating is shaped to fit keel. Approximately 8 inches wide (4 inches either side of keel) and 6' long. Designed to protect keel from damage during beaching. Hull has additional laminate for installation and extra strength. Available on most models. Powder-coated black. Factory installed only.

Hull Coloring, Lettering and Paint Options

• Boat ID Numbers (Vinyl) & Plate
• Bottom Paint
• Custom Color- Hull Exterior
• Custom Color- Hull Interior
• Painted Hull Lettering (up to 15 characters per side)
  

  One-color letters / numbers painted on hull sides (up to 15 characters per side). High-quality paint provides durable finish. Customer to specify color font and text. Hull drawing provided upon request showing placement width and size of text. (up to 15 characters per side)

• Painted Hull Slash- 1 color
  

  A one- or two-color angled slash painted on hull sides. High-quality paint provides durable finish. Customer to specify color. Hull drawing provided for placement width and size of slash to configure additional graphics. Boat number must be supplied by the customer.

• Painted Hull Slash- 2 color
  

  A one- or two-color angled slash painted on hull sides. High-quality paint provides durable finish. Customer to specify color. Hull drawing provided for placement width and size of slash to configure additional graphics. Boat number must be supplied by the customer.

Engine Equipment / Installation Options

• 3 Gallon Bombardier Oil Tank
• 3 Gallon Mercury Oil Tank
• 3 Gallon Yamaha Oil Tank
• Bombardier Dual Engine Pre-Rig W/O Gauges
• Brp E-Tec Dual Engine I-Command Digital Gauges
• Builders Trials & Systems Check with Customer At EC Facility
• Dual Engine Installation & Performance Verification
• Honda Dual Engine Pre-Rig W/O Gauges
• Mercury Dual Engine Pre-Rig W/O Gauges
• Mercury Dual Engine Verado Pre-Rig W/DTS & Smartcraft
• Propeller, Stainless V-6's
• Propeller, Stainless V-8's
• Racor Fuel / Water Separator Upgrade (1)
• Virtual Lifeline wireless emergency engine shut off device- Dual O/B Eng
• Yamaha Dual Engine Pre-Rig W/O Gauges
• Yamaha Pre-Rig Dual "Dec"

Gauge and Light Options

• Bombardier Dual Engine Gauge Package
• Bombardier Oil Level Gauge
• Bombardier Speedometer (1)
• Bombardier Water Pressure Gauge (1)
• Bow Docking Lights
• Cockpit Light- Red (1)
  

  For mounting under cockpit gunnels or cabin overheads. Subdued red light reduces loss of night vision. Individually switched or wired to dash panel. (red)

• Floodlight (1)
  

  Designed to flood working areas with a 50-watt halogen diffused light spread over a large area. Non-corrosive black casing and durable stainless steel bracket for easy mounting on roofs, towers, masts, etc. Measures only 7 inches wide by 5 1/2 inches high by 4 inches deep. Frequently mounted in pairs for added dependability.

• Honda Dual Engine Gauge Package
• Honda Water Pressure Gauge (1)
• Mercury Dual Engine Analog Gauge Package
• Mercury Dual Engine Smartcraft Gauge Package
• Mercury Dual Engine Vessel View Gauge Package - Opti
• Mercury Oil Tank Level Gauge (1)
• Mercury Speedometer (1)
• Mercury Water Pressure Gauge (1)
• Push To Start Panel Upgrade - Dual Engine (standard)
• Spotlight, Handheld W / Base and 12-Volt Outlet
  

  Hand-held waterproof spotlight (black 6 inches case) with 2 Halogen light bulbs, 55-watt for close-in range and 100-watt long-range, switched independently. Electrical connection: spiral cable leading out of handle, extended length approximately 3.5 m, with universal plug for connection to socket or cigarette lighter. Comes with mounting bracket and 12-volt outlet.

• Vessel View Gauge Upgrade - Dual Eng Verado
• Yamaha Dual Engine Gauge Package
• Yamaha Dual Gauge "Dec"
• Yamaha Fuel Management Gauge
• Yamaha Hourmeter (1)
• Yamaha Water Pressure Gauge (1)
• Yamaha Water Temperature Gauge (1)

Electrical Accessories Options

• 12V DC Converter 9 Sure Power P/N 522040
• 12 Volt Outlet
• 80 Watt Solar Charging System
  

  For charging batteries using solar power. Includes 80-watt solar array that can be mounted on T-top or elsewhere on the boat. 15 Amp charge controller with an LCD digital meter display.

• Battery Charger For 1 To 3 Banks (Requires Appropriate Shore Power Option)
• Battery System For Dual Engines, Two Starting Batteries And One Aux Battery (Does Not Include Batteries)
• Battery System For Dual Engines, Two Starting Batteries And Two Aux Batteries (Does Not Include Batteries)
• Battery System For Dual Engines, Two Starting Batteries (Does Not Include Batteries)
• Dynoplate Bonding System To Include 6" X 18" Plate And Connection To Craft Bonding System
• Electronic Cables And Conductors Supported By (Cres) Stainless Steel Supports/Cres Banding With Chaffing Protection. (Except In electrical enclosures and cabin/console)
• Maintenance Free, Wet Cell Deep Cycle Battery, Group 27, 115 Amp Hr
• Maintenance Free, Wet Cell Starting Battery, Group 24, 1000 Mca
• Optima 34m-1000 Mca (Agm) - Engine Starting Battery
• Optima D34m-870 Mca Deep Cycle (Agm) - Auxilary Battery
• Shore Power 110vac/60hz
• Shore Power 220vac/50hz
• Shore Power 220vac/60hz
• Transducer Upgrade Thruhull
• Verado Engine Starting Battery (Agm-1110) Required For All Verados

Navigation and Safety Options

• 5 LB Fire Extinquisher
• Bilge Pump, Manual Diaphram Pump W/Overboard Discharge
• Compass, KVH Azimuth 1000 Digital Fluxgate
• Compass, Ritchie Navigator (Flush Mount)
  

  Flush mount recommended on 17' and larger models. Well dampened for rough-water use. Backlit, with compensation adjustment. 4 1/2 inches power damp dial. (flush mount)

• Engraved Instruction and Warning Label Package
• Spotlight, Acr Remote Control 200,000 Cp
  

  This compact, lightweight spotlight develops 200,000 candlepower in a very tight beam. Because of its durability and compact size, mast mounting is desirable, reducing looming effect on deck. Comes complete with touch pad control.

• Spotlight, Acr Remote Control 80,000 Cp

Fuel Systems Options

• Manual Fuel Tank Sounder

Console and Steering Options

• Hydraulic Tilt Steering
• Twin Cylinder Steering Upgrade (standard)

Propulsion and Drive System Options

• Blank No Engine (standard)
• Trim Tabs - Electric W/ Indicator Switch Panel (standard)

Seating Options

• 36" Alum Leaning Post W/ Doors, Grabrail, Gunrack/Strge
  

  Aluminum leaning post features lockable storage for shotguns and gear in the back of the seat. Available on most center console models 18' and larger.

• 36" Alum Leaning Post W/ Doors, Grabrail, Gunrack/Strge, Blstr
• 36" Alum Leaning Post W/ Storage Box & Ammo Can Ext. Lid
• 36" R6 Alum Leaning Post W/ Aft Storage Box
  

  Rugged, welded aluminum unit featuring our proven leaning post shape with a lockable storage box aft. Upper portion of leaning post includes a shelf with lockable / sliding Plexiglas doors and grab rail. Room below for batteries, VRO tank and more storage. Measures 36 inches wide by 30 inches fore and aft by 33 inches high. Cushions are removable. For Guardians 18' plus and other center-console models 21' and larger. Because of length, this unit may interfere with dive door opening on some models.

• 36" R6 Alum Leaning Post W/ Door (standard)
  

  Available on all center console models 21' and up. Features two lockable Plexiglas doors, a storage shelf, grab rail and removable cushion. Room inside for two batteries and / or 3-gallon VRO tank.

• 36" R6 Alum Leaning Post W/Door, Aft Storage Box & Backrest
• 36" R6 Alum Leaning Post W/ Door, Backrest, Footrest

  Backrest and footrest for an aluminum console. Welded construction, 3/16 inches aluminum.

• Delete Standard Seating
• Dual Pedestal Seats With Armrest
  

  Rotationally molded of tough UV resistant white polyethylene, marine-grade white quilted vinyl, snap-on removable cushions; tee-nut bottom inserts accept anodized support rails that make it compatible with most pedestals, swivel and fore and aft seat slides.

• Folding Aluminum Foot Platform For Leaning Post
• Tubular Aluminum Leaning Post W/ Grabrail- 36"
• Tubular Aluminum Leaning Post W/ Grabrail & Aft Seat- 36"
  

  This rugged, lightweight 36 inches-wide seat has room underneath for fuel tanks or small coolers. Welded aluminum construction. Upholstery is removable. For all center console models 16' and larger.

• Ullman Atlantic Seat
  

  Designed primarily for cabin boats and to allow straddle position when needed and reclining when possible. Superp comfort with soft leather upholstery and extra-high carbon-fiber backrest. Vinyl upholstery optional for open cockpits. Armrests with fittings for Joystick and trackball are optional. Ullman Leadflex Atlantic Suspension Mechanism allows 200 mm travel. Can be optimized to any specific vessel. All Ullman seats are designed to protect the rider from injuries. The seat design optimizes your body posture, while the spring and damping system take care of the high forces during impact.

• Ullman Biscaya Seat W/Fiberglass Base
  

  Biscaya has a high backrest for maximum comfort and support. Longer saddle sides for optimal lateral support in straddling position. Extra padding on the front of the backrest and over its top. Zipped neoprene pouch for gear on backside of backrest. Two handles - wider support for passengers behind. Available on FRP bases for two seat heights 750 mm and 810 mm. All Ullman Seats are designed to protect the rider from getting injured. The seat design optimizes your body posture while the spring and damping system takes care of the high forces during impact.

Deck Cooler / Utility Box Options

• 72 Quart Cooler with Cushion and Holddown
  

  Cooler comes with removable cushion, floor cleats and hold-down cords. Ideal for dry storage or iced beverages. Shipped factory installed or loose. (72-quart cooler, 34 inches long, 18 inches wide, 18 inches tall)

• 94 Quart Cooler With Cushion And Holddown
  

  Cooler comes with removable cushion, floor cleats and hold-down cords. Ideal for dry storage or iced beverages. Shipped factory installed or loose. (94-quart cooler, 33 inches long, 18 inches wide, 19 inches tall)

Weather Protection Options

• Canvas Cover For Aluminum Leaning Post With Gun Rack and Storage Shelves
• Canvas Cover For Aluminum R6 Leaning Post
• Canvas Cover For Fiberglass Console Without T-Top
• Canvas Cover For Fiberglass Console With T-Top
• Canvas Cover For Fiberglass Pedestal Leaning Post
• Canvas Cover For Heavy Duty Aluminum Leaning Post With Backrest
• Canvas Cover For Heavy Duty Aluminum Leaning Post With Storage Box
• Canvas Cover For Heavy Duty Aluminum Leaning Post With Storage Box & Backrest
• Canvas Cover for Pedestal Seat
• Canvas Mooring Cover
• Canvas Mooring Cover for Craft W/ T-Top, Crash Rail & Engines
• Canvas Weather Curtain System For Heavy Duty T-Top (4 Pieces)
  

  Optional for the medium-duty or heavy-duty t-top. Completely encloses the operator with forward, rear, port (medium-duty part has four pieces) and starboard drop curtains. Composed of rugged acrylic material with non-corrosive zippers and snaps. On models less than 25', trim tabs are recommended to correct for list caused by strong crosswinds and to prevent wind-induced porpoising at high speeds. (Heavy-duty, four pieces)

• Suntop With Boot
  

  A ruggedly simple method of providing sun protection for center console models. Fabric is a durable acrylic material that is fade resistant. Bows are stainless steel. Generally, this top is centered over the driver, providing fore and aft shade. May be easily retrofitted in the field. Available for all models except Challengers and Vigilants.

• T-Top, 270JC Heavy Duty W/ Electronics Box
  

  60608: This top was designed for commercial service. Tube size and fastening systems were taken into account. The top measures 60 inches by 86 inches long and consists of a laced acrylic fabric over aluminum bows. Flat aluminum plates are located under the canvas for antennas, strobes, sirens, etc. An aerodynamic fiberglass box is attached under the top for flush mounting radios, etc. Top is suitable for mounting up to 75 pounds of equipment. Included with the T-top package are heavy-duty console floor cleats. Consult factory for crating and shipping details. For center console boats 18' and larger. 60609: Same size and configuration as the medium-duty unit, but with heavier tubing, fiberglass radio box enclosure, acrylic fabric and heavily reinforced floor and hull structure. Supports up to 150 pounds. Factory installed only. For center console boats 21' and larger. (medium-duty)

Law Enforcement Equipment Options

• 6" Strobe Light W/ Amber Lens (1)
• 6" Strobe Light W/ Blue Lens (1)
• 6" Strobe Light W/ Red Lens (1)
• Flush Mount Siren W/ Amp
• Flush Mount Strobe W/ Built-In Siren & Amp
  

  Ideal for the front side of consoles, this high-powered siren has the same sound quality as the streamlined siren. Protrudes only 1 1/2 inches from the surface and houses a powerful 3 inches by 7 inches blue strobe. Amplifier with weathertight enclosure mounted inside console. Uses noise canceling microphone and has 100-watt PA wail, yelp, horn and manual siren functions.

• LED Light Series 400 Blue (QTY 1)
• LED Light Series 400 Red (QTY 1)
• LED Light Series 500 Blue (QTY 1)
• LED Light Series 500 Red (QTY 1)
• Streamlined Siren W/ Amplifier
  

  An attractive 100-watt siren for mounting in front of consoles (optional bracket required), on roofs or towers. Amplifier in weathertight enclosure to prevent internal corrosion. Remote face plate is non-corrosive and matches other Whaler switch panels. Manual siren button plus wail, yelp, PA and horn functions. Noise canceling microphone is detachable.

• Whelen 28" LED Mini-Edge Ultra Freedom W/ Siren, PA, AMP
  

  An attractive 100-watt siren for mounting in front of consoles (optional bracket required), on roofs or towers. Amplifier in weathertight enclosure to prevent internal corrosion. Remote face plate is non-corrosive and matches other Whaler switch panels. Manual siren button plus wail, yelp, PA and horn functions. Noise canceling microphone is detachable.

• Whelen 28" Strobe Mini-Edge 9M Series Light Bar
• Whelen 28" Strobe Mini-Edge 9M Series Light Bar W/ Siren, PA & Amplifier
• Whelen 48" LED Edge Ultra Freedom W/Siren, PA & Amp

  28” and 48” wide light bar features low-profile LED lights. Lights available in red, blue and amber. Includes siren, PA and amplifier (not shown). Ask for optional mounting locations.

• Whelen 48" Strobe Edge 9m Series Light Bar W/Siren, PA & Amplifier

Diving and Rescue Equipment Options

• Floor Matting - Open Pattern
  

  A cushion-type mat that covers the floor using 1/2 inches thick matting. Open pattern allows water to drain through matting and aft into drains. Connected together with special connectors.

• Freshwater Shower
• Raw Water Wash Down System
  

  12-volt pump, sea suction and faucet outlet make saltwater washdowns convenient. For 18' and larger models.

• Removable Track Style Divers Tank Rack For 6 Bottles
  

  Three or six fold-up bottle holders for all models except Alert series and 17' Guardian. (for 6 bottles)

• Rescue Rails (Port & Starboard)
  

  Available for all models. Rugged 1 inches powder-coated aluminum rails feature welded construction, oversize mounting and backing pads and stainless steel bolts (four per pad). Note: When hull cutout is ordered the rail on the cutout side is split with a section forward and aft of the cutout. (pair)

• Welded Aluminum Divers Tank Rack For 3 Bottles
  

  Three or six fold-up bottle holders for all models except Alert series and 17' Guardian. (for 3 bottles)

Aluminum Trailer Options

• Customer Supplied Trailer Set-Up Charge
• Dual Pneumatic Caster Wheel Upgrade - Alum. Trailer
• Heavy Duty Aluminum Trailer W/Torsion Axles
  

  Designed for heavy-duty applications, each trailer is created and fitted for each Boston Whaler hull size. This ensures proper hull support, balance and safety both on the highway and when launching or retrieving boats.

• Led Trailer Lights
• Pintle Hitch W/Brake Actuator - Alum. Trailer
• Stainless Steel Caliper Assembly, Cylinder and Guide Pins
• Tie Down System, Boat To Trailer/Trailer To Aircraft
• Trailer Hitch W/Adj Plt/Lunette Eye/Ball Rcvr
• Trailer Military 7 Pin Plug

Galvanized Trailer Options

• Dual Pneumatic Caster Wheel Upgrade - Galv. Trailer
• Heavy Duty Galvanized Trailer
  

  Designed for heavy-duty applications, each trailer is created and fitted for each Boston Whaler hull size. This ensures proper hull support, balance and safety both on the highway and when launching or retrieving boats.

• Pintle Hitch W/ Brake Actuator - Galv. Trailer

Towing Equipment Options

• Engine Crash Rail- Outboard W/ Removeable Hoop
• Pusher Knee System
• Tow Post
  

  Rugged, simple, heavy-duty post for select 17' to 27' boats. Bolts to reinforced areas within the hull. Strut tubes (19' to 25') attach above the bit for added strength and to prevent the tow line from swinging amidships. Three-bolt attachment system permits easy removal when not required. Installation varies for models, sizes and options. For boats with single engine installation only. Consult factory.

Commissioning Gear Options

• 1200 Amp Booster Pack
• Diagnostic Equipment For Engines, Includes Fully-Rugged Panasonic Toughbook 30 And Documentation Of Initial Set-Up (Brp) (Ea)
• Diagnostic Equipment For Engines, Includes Fully-Rugged Panasonic Toughbook 30 And Documentation Of Initial Set-Up (Mercury)(Ea)
• Diagnostic Equipment For Engines, Includes Fully-Rugged Panasonic Toughbook 30 And Documentation Of Initial Set-Up (Yamaha) (Ea)
• Fender, Black With Dedicated Storage (Ea)
• Licensed Professional Engineering Review, Approval, Signing, And Dating Of Certification Documentation For Lifting System. Includes Copies Of OEM Test Documents/Certifications As Supplied With Sling.
• Life Vest, Type II, Black, Adult Size, Auto Inflatable (Ea)
• Life Vest, Type II, Black, Adult Size (Ea)
• Paddle, 5', T-Handle, With Dedicated Storage (Ea)
• Safety and Commissioning Package For Four People
  

  Consists of: commercial-grade life vests (PFDs); galvanized anchor with coated chain and pre-spliced, double-braided anchor line; fenders; pre-spliced double braided dock lines; throw cushion; one boat hook; one paddle; one air horn; one refill for air horn; one flare kit; one first-aid kit. Quantities, sizes and lengths depend on boat length. Consult factory for details.

• Tow Line, 5/8" X 250'

Shipping Options

• Shipping Cradle
  

  A simple skid for storing boat on a level plane or when a trailer is not ordered. Required for ocean-freight shipments.

Submit Your Boat

Fields marked with * are required